Hello, Barton 2500+ GA-7N400 Pro2 512 PC 2700 Mushkin Ram. After installing my new components and repairind XP I found that my IBM USB mouse will not be recognized during startup. The mouse's LED will flicker weakly then shut off. When XP comes up it will usually say that there is some...

Have tried fitting both Nvidia Geforce4 & FX cards to my M/B without success - the RAID drives disappear and my PC is unable to boot. Although all is well with my Geforce3. Does anyone here know if the M/B is compatible with the recent generations of ATI graphics cards? Hardware config...

I am thinking of buying a system and abit ic7 i hear has probs with sound and dfi lan party i hear has some issues so how is this board with the sound and in general? thx

Hello. I just completed the install of a 8KNXP Ultra mobo and I'm trying to configure my system to boot off of my existing SCSI setup (4 hard drives & tape device). I've looked in the Award BIOS and in the SCSI Select software and I can not find a place to set the SCSI ID to use for boot. The...

I have a GA8-KNXP and wanted to install windows xp on a RAID 0 array (2 WD800JB drives connected to IDE3 and IDE4). The windows setup works well until it asks for the partition where it should be installed to. I select the RAID 0 volume and in the next step, when the setup wants to format that...

Anyone? I am still using F5, wondering if I should update. Thanks

I just purchased this motherbaord and have it up and running. I need to know where everyone is getting there memory timings from. I'm running bios FE on the Rev.2 board and can't find these settings in the bios anywhere. Is there something I just overlooked?

http://www.ocworkbench.com/poll/intel2003.php

Gents: I'm looking to do my first system build-from-scratch and would appreciate any advice. GByte seems to have an excellent (recent) history or solid mobos. I've built-out several times from "bare-bones" ( using INTEL/ASUS & CTECH products ) , but never from a stack of raw components. ASUS I no...

Could someone please offer advise over which board would be preferable? I currently have both & would appreciate some info as which to put in my main system. Using an Athalon 2600 in the main system and a 2400 in the second.

Sorry, if this is a bit long, want to specify the problem as clearly as possible. I'm a hardware newbie and I just upgrade my Pc recently. So after i installed the hardwares. I installed several softwares in the following procedu 1)use the win98 startup disk 2)format hard disk 3)install...

I have the Gigabyte GA 7 AVXP Ultra motherboard and it accepts upto 3 gig of ram, Updated Bios to F6 version, pc runs GREAT (no overclocking) amd 2100 athlon, using 2 crucial 512 sticks of 2700 ram, I added one more stick of ram to make it 3 sticks of 512 and the computer goes nuts and reboots on...

Can SMART for HDDs be enabled on this board? Can't find it in the BIOS. Steve

Hi! Does anyone know which motherboard is better or what the difference is? Tyan S2850G2N ASUS SK8N I am looking at the Opteron 140. Is AMD64 better than Opteron? Or why would one purchase a AMD64 vs Opteron?

Any clues or is this version stuffed..? went back to F2 and all is OK.. Noticed that F5 takes a lot longer to boot, plus you get that extra scanning hard drive thing..

Ok, I've got a Gigabyte motherboard with nforce2. The nforce2 chipset is supposed to have onboard video, right? So where do I hook up the f'n monitor?? My other video cards are AGP 2X so they are not supported by this board. Please don't make fun of me, I already feel stupid enough for...

Folks, My venerable MSI 6163 Pro fried recently and I have just installed a second-hand Gigabyte GA-6BXC to get my development PC back on the air. I know PIII Slot 1 100FSB CPU was available up to 1Ghz and my 6163 could have coped (with the latest BIOS), but I cannot find any mention of the...

AMD Athlon 64 Driver: http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_9706,00.html I wish I was informed that I had to install the driver to realease the real power of this processor. I downloaded it from AMD and followed instructions to install and now notice a marked...

Just replaced my epox 8k3a+ with the above board, its fitted with an Athlon XP2500 Barton running on a 166mhz bus. with an AX7 Thermalright heatsink/Artic Silver 3 compound. The core voltage is set @ 1.65v but the sensors read 1.75v (both in bios & windows), and the CPU is becoming unstable @...

I have a USB Memory stick (256MB) that when I plug into my 8PE800Pro works fine (Windows 2000 SP3) - however when I go to the eject/unplug hardware icon in system tray and stop it, the computer reboots. Works fine on another Win2k computer Any ideas? Alan Houghton