hello, ga-k8n ultra-9 After I installed WinXPsp2 (32bit) I used the @Bios utility to go from F3-F6. The machine works fine, with the bios showing the correct version. However Apps like CPUZ or SANDRA still show F3. Why? I've never seen this before with other boards. Is there any fix, or should...

Hi all, I have just upgraded the motherboard in my PC and now I have a problem. The system works fine apart from the fact that whenever I plug a Sony digital camera (I haven't tried any other brands as I dont have access to any, but I have tried 3 different model Sony camera) into any of the...

I've got a 8S661FXM with an odd problem. I'm trying to use 5.1 sound, and I've got no sound from the front left and front rights speakers. I've tested the speakers on other systems, and other speakers on this system, and determined the problem is in this PC. I'm thinking the problem is probably...

My problum is that i can not even find this board listed on there web site the closestes one i could find is http://us.giga-byte.com/Server/Products/Products_ServerBoard_GA-6VTXDR-C.htm But its drivers are no good for the raid. I bought this MB used and asside for the driver issue i have no...

Well after three weeks of trying everything (suggested by posters here) from using default IDE drivers, to disabling USB, taking out the sound card, replacing ram, etc etc, I've sent back my SATA II drive for a repair/replacement. Regardless of what I'd do, when the SATA controller was enabled on...

I've been trying to get a decent overclock on my 2.8 P4 but am unable to with 8I875Ultra. The system ussualy hangs just after entering windows and after a while it restarts. The FSB won't even OC for more than 5MHz :) Does anyone know what are the best OC capable BIOS for this board or is the...

Hi there, i hope someone can point me in the right direction or give me a fix for this prob. After installing winxp pro sp2 i install all my device drivers untill i get to the UAA BUS DRIVER, once i install this i find that every time i want to open any files or folders or access my c:,d:,e:,...

I have two SATA Drives on ATA1, ATA0 - ICH5R connectors. What do I have to configure if I want to add one to the ATA0 - Sil3112 connector? What do I have to configure in the Bios settings? Thanks,

1 x AMD (Venice) Athlon 64Bit 3200+ Socket 939pin 512k L2cache 90nm Retail Boxed Processor 88109 £106.76 £106.76 1 x Kingston 1GB DDR PC3200 400MHz Non-ECC CL3 (3-3-3) 184pin DIMM's (Kit of 2 x 512mb) 49296 £59.14 £59.14 1 x Gigabyte GA-K8NSC-939 SKT939 NF3 250gb 8channel audio AGP8x Retail 91670...

The computer was working, then all of a sudden, The board does not boot up with video. When I power up the system all seems OK. But no video. I tested the RAM, Changed the RAM and PS and video card. but no help. The system seems to start OK, no beeps that any component is bad. Just...

Hi, I've a Giga Byte GA7XZ.I've update bios and driver. With Linux I'm be able to shutdown the system automatically. Under XP PRO I must push the power button to turn off the system. Why? Is there some options in bios or win to setup? Thanks Andrea

I bought a Mustek PowerMust 1000 online UPS and connected my pc to it. If I connect DB9 serial cable provided with the UPS, BIOS freezes. It displays BIOS revision on screen but hangs before beginning memory test, then I can only hardware-reset my pc or turn it off. It's impossible to enter BIOS...

I have an odd driver problem. Everytime I turn on the PC or reboot it, Windows XP "detects" SM Bus Controller" and fails to get any driver installed. If I manually install Intel chipset driver, the problem goes away (no yellow ? mark in Hardware) until I reboot. I think I need something...

I can't really tell on the beeps, but to me it sounds like 1 short and 3 long beeps. I've replaced the motherboard, PSU, RAM, removed video card all to no effect. From the manual there is no code corresponding to the beeps I'm getting. At this point I'm at a loss to the problem.

Hi, I think of replacing my second 80GB hard disk. But before I do so I need to know if there are any known restrictions or issues regarding the disk size. Does the BIOS F7 of the GA6-7N400L deal with a 200GB hard disk (or bigger) without any problems? Thanks and bye Marcus

"djezirir" wrote: Yes I have it in the device manager. The thing is when I plug the canle, I have the network trying to "acquire network address' but nothing comes out. It stays with IP 0.0.0.0 However that works with the PCI network board I called my ISP provider and they have done...

Hi, Just to report that with the F9 Bios I can run Cucial Ballistix 4x512 MB sticks @ 200MHz (400DDR) when the previous highest it would reliably run was 180MHz. I always thought the 4 populated DIMM slots and not being able to run RAM at 200MHz was an something I'd have to put up with. Anyone...

Bios Version : F7 OS : Windows XP Pro SP2 Controller : NForce4 Ultra (Not Sil) I seem to be having an issue whereby the K8NXP-9 seems to hate SATA-II drives, to the point where my Hitachi Deskstar 7K250 just locks up the whole system after sustained read or write operations in Windows. Tested...

Ok got a Gigabyte GA-7AVXP-Ultra board. Decided to upgrade the 2 x 80Gb Maxtor drives for a pair of 200Gb Western Digitals. The problem seems to be that I cannot change the RAID Array to RAID 0. It keeps showing as RAID 10 (or 1+0) which I read somewhere is a stripe mirror!!! I have 2...

"djezirir" wrote in message ... Hello, I have recently changed my config for a Gigabyte GA-K8NS ultra 939 with an Athlon 64 3500+ Venice. Evrything went fine and I install XP Pro SP2 as O/S....