|
|
GA-7VA Reseting by
Alan
I've tried searching the group for an answer to this, but with no luck.
Can 400MHz DDRs be used with the GA-7VA board or not?
I've just built two identical systems with the above board, 512Mb 400MHz
DDR, AMD Athlon XP2600+ and Asus 64Mb Geforce 4 MX440 card.
Both machines insist on rebooting at...
|
|
9 |
670 |
|
|
Gigabyte GA-7N400 Pro by
Richard
Hello
I have just upgraded my PC and am having a few problems. Any help or
comments would be appreciated.
Original system was based on an AMD Athlon 500 mHz, 1287MB RAM, 10GB
HDD, CD, DVD, CDRW with PCI modem, sound, TV and network card, 1x AGP
ATI RAGE 128 graphics card running off a 250W PSU....
|
July 27th 03 09:36 PM
by boh
|
1 |
390 |
|
|
8KNXP ITE suffers BAD performance... by
modem
Earlier today I decided to do a comparison of the ITE Gigaraid IDE
chipset vs a standard Promise UltraTX2 IDE PCI adapter. I did this
after I read a few comments over the past few months that suggest the
ITE Gigaraid chipset is very subpar.
All of my tests were ran on a clean fresh Windows 2000...
|
|
7 |
623 |
|
|
Slow HDD performance by
Fred Klingenmeier
You need to update your raid drivers, not nVidia drivers. After raid was
set up Windows XP did so automatically in the Windows update drivers
section.
"sid" wrote in message
...
Gigabyte GA-7N400Pro (nForce 2) matched with
...
|
|
0 |
636 |
|
|
GA-VA m/b by
Lola Mackey
hi all,
does GA-VA m/b has LAN incorporated?
(some adv's say Yes, some NO?
btw, is it a good m/b?
rgds
fr
--
|
|
4 |
418 |
|
|
8INXP - DPS power failure by
Richard Dower
OK...so it seems i have now encountered this strange error message. I had a
56K modem installed on the last PCI slot, PCI 5...i took it out because i
got DSL. Then when i booted up i got the power failure warning.
I am not sure if in fact it had anything to do with removing the 56K modem,
or if it...
|
|
2 |
543 |
|
|
GA-7NNXP or 7N400 ... dual channel mem with four dimms by
Harry Muscle
Reading over reviews, I've noticed that the Gigabyte GA-7NNXP and GA-7N400
have four dimm slots. Does anyone know if dual channel operation is
possible with all four slots filled? From what I recall, the NForce chipset
only support 3 dimm slots, which means that the only way to have dual
channel...
|
|
4 |
747 |
|
|
81NXP for sale (toronto) by
La Pedrera
I am selling this board. I've upgraded to something supporting the 800 bus.
Board is approximately 4 months old.
225$
Also selling my Pentium IV 1.8 CPU.
140$
|
|
0 |
1,215 |
|
|
8KNXP bios F6e CPU Voltage problems.. by
Bob Davis
"Johan Dahlberg" wrote in message
...
Hi everyone,
I'm having difficulties getting a stable 1.55v for my P4 3.0C CPU with the
F6e bios, anyone else having the same problems?
The voltage keeps jumping from 1.47-1.55...
|
|
2 |
970 |
|
|
Boot from SATA 81NXP by
La Pedrera
I purchased a SATA drive and have cloned it over (using Ghost) and now want
to boot from this drive * much faster than my old 10gb ATA one *.
I still want to have the other drive connected and accessible.
How do I change this? I see the setting in the bios for BOOT ORDER, but when
set to SATA it...
|
|
5 |
676 |
|
|
heatsink and fan for GA-7N400 pro by
Marc Martuscello
hey group,
I have a gigabyte GA-7N400 pro motherboard, I am looking for a heatsink
and fan that will fit this board. i am getting an AMD 2600 athlon xp cpu. I
will be doing some overclocking. also any input for a video card would be
greatly apreciated. i plan to spend about $200 on a vid...
|
|
1 |
456 |
|
|
7N400 Pro restarts by
boh
Hi,
I have just put together a GA-7N400 Pro system with 2x512MB RAM, 2x80GB WD
RAID drives, 10 GB application drive, MSI FX5200, Termaltake 420W power. No
overclocking.
I think I have all the latest drivers and bios. Sometimes one I access
different applications it will just reboot. No...
( 1 2)
|
|
11 |
922 |
|
|
8KNXP and Zalman CNPS7000-Cu by
Bob Davis
I just installed a Zalman CNPS7000-Cu yesterday. The good news is that it
is very quiet and cools well even in silent mode. The bad news is that it
did not fit my mobo with DPS2 installed, despite indications from others
that it would fit. I'd say it needs to be at least 1/8" smaller in...
|
July 26th 03 04:03 PM
by Axl
|
5 |
733 |
|
|
GA-7VAX-A and an XP 2100+ @ 333 by
NuT CrAcKeR
Hello All,
I have been reading up on the B core t'breds, and the consensus seems to be
that most of them can run at 166 (333). The thing is, the 7VAX-A board I
have only has the switch for Auto/100. There is a place on the board where
another switch looks like it could have been placed... IF i...
|
July 26th 03 05:34 AM
by JKBK
|
3 |
406 |
|
|
Mouse Cursor dissapears after reboot by
Frans Groot
Gary Seven wrote:
On Windows 2000 with SP4 when I reboot the moist cursor doesn't come
back. this only happens when I Go to Start, then shutdown, and hit
restart. If I actually shut off the PC, and turn it back on its
there. I am using a Logitech USB...
|
|
2 |
521 |
|
|
GA-8IK1100 and Mouse Problems by
S.Heenan
Gary Seven wrote:
I posted on this before but didn't get much of a response. I have a
Logitech Optical mouse. When I reboot sometimes the cursor is gone.
I flashed the F6 bios, and I installed the latest mouseware from
lotitech's site. Still I get the same thing. I also have the...
|
|
8 |
406 |
|
|
GA-7ZXE wrong CPU temperature? by
llywiwr
GA-7ZXE
When I boot up from cold with a room temperature of about 25 deg. C. my CPU
temperature immediately shows as 35 degrees. Is this a fault with this
board?
|
|
1 |
998 |
|
|
GA-7VAXP Ultra Chipset Fan Noise by
The Maxx
My GA-7VAXP Ultra Chipset fan has started being really noisy. I took it off
and cleaned it out and that seemed to help a bit because it was clogged with
dust and dirt, but it's still really loud. There are times when it will
eventually calm down, but most days it just stays really noisy.
I'm...
|
July 26th 03 02:33 AM
by Jeff
|
3 |
353 |
|
|
8KNXP: VCore=Fail by
Musk
I've noticed this message on the system health screen in bios. What exactly
does this mean and is it a problem? I ask because it's always shown this,
and yet i've been using my new system with this mobo for 6 weeks with no
problems. Everything works great from the latest games to video and...
|
July 26th 03 02:26 AM
by Musk
|
0 |
466 |
|
|
2600 XP running at 1262 on a GA-7VAXP Ultra? by
John Constable
I've run some diagnostic utilities and they report my CPU (2600
thoroughbred) to be running at 1262. My bios says (my FSB?) speed is 100. I
tried to change it to 166 and it failed to boot (rebooted on its own with
setting changed back to 100)
My questions:
1) can some recommend a good diagnostic...
|
|
3 |
509 |