Greetings, My first time in this group. I'm encountering a strange problem with gigabyte board & have reached my wits end troubleshooting it. I will try to describe in detail whats happening and what I've done so far. 1. The problem.

BAD BIOS CHIP FLASH? VISIT: http://bioschips.nlan.org For Replacement chips $15 re-flash of existing chip $8

A friend of mine has a GA-6BXE Rev 1.9 based machine and is looking to replace the existing Matrox G200 card with something with more memory (to run Age of Mythology). I have seen some warnings about GeForce cards, and I'm definitely not up to making wiring changes to the motherboard! Would a...

I have had this 7nnxp for a few months now and have had a problem with the onboard sound. The right channel comes out with static over it. I have tried driver updates, bios updates, different speakers but to no avail. Does anyone know how to fix this problem? Stephen Sherman

My pc has a ga-7dx rev 2.2 and is running the stock amd 1000 cpu. I started looking into upgrading the cpu, and that lead me to upgrading the bios. Right now I am still running an f1 bios from the micron sight. When I check the gigabyte site I see f6, f7 & f8 bios upgrades, but they mention rev...

I'm having problems adding an extra 512MB of memory to my 256MB GA-7VRXP W2K/W95 dual boot system and would appreciate some advice. I've tried three different types of memory, two lots of PC2700 and now a strip of PC2100 (Kingston branded). In each case the symptoms are the same; The BIOS...

Anyone with Windows SP2 and a powerdown problem?

i've having lots of cd-rom read problems leading to freezes. i toggled rom drives, ide configuration (master/lave) and nforce/gigaraid channels. nothing worked. i reverted to the old Microsoft standard dual IDE driver and the problem is gone. anybody know of issues with Nvidia IDE drivers? what...

I just put together a machine and it hangs at "Checking NVRAM" The mobo is a GA-7ZM and the CPU is a Duron 750. I can't seem to find the CMOS reset jumper so I removed the battery for about a minute and still no luck. Any help would be appreciated. Thanks in advance.

In PC Health Status, in the BIOS I am seeing 7 degrees C for the CPU and 4C for the board.. I know this cant be right I am also seeing these same temps using Nvidia nvsystemutility. I am hoping future BIOS updates will fix this..Anyone else seeing these low temps? Thanks.

I am having a problem getting Striped Raid 0 drivers loaded during the Windows XP install "F6 to load drivers" phase. The bios will build the array no problem. When Installing I get to "F6" fine. When I am given the load drivers screen my only choice there is "S" for select (there is no "O" for...

Hello, The microphone input to my motherboard is putting out a +2.5 volts on the tip as related to the common and I was just curious if this is normal for the microphone input to be putting out this voltage ? -- Regards;

LTR-48125W Secondary Master on Gigabyte Motherboard GA-7N400 pro 2 (PCB rev 2.0) Driver NVIDIA nForce 2 ATA Controller (v2.5) 5.10.2600.415 built by: WinDDK Best nForce2 IDE Driver settings, NVIDIA multi word 2 using NVIDIA drivers, NOT ultra-dma and NOT pio and NOT standard windows IDE...

My config: GA-K8NS Pro 1 gb Corsaiar XMS PC3200 (2 512mb) 2 WD Raptor 10,000 rpm in RAID 0 The problem is neither DiskImage 7 nor Acronis TrueImage will recognize the RAID array. If I use SIL 3112 SATA RAID the array will be recognized by the Imaging programs. I suspect it's the nVidia...

Hi All, I recently purchased (new) a GA-7N400-L mainboard, and pupulated with an Athalon 3200+ and 512MB PC3200 DIMM. This is replacing my GA-71XE. Or is trying to... Here's the problem:

Since installing this combo the computer has been failing to start intermittently, until now it won't start at all. Previously, unplugging the mains plug and reinserting it cured the 'no power' problem, but now all I get is a quick burst from the PS fan and then nothing. When this happens the RAM...

Hello, I have the GA-8ig1000g-pro board with the 865G chipset with 98se installed. Was having a problem of not being able to restart the machine from windows, I could shutdown but not restart through the start menu - the machine would hang on the final splashscreen. So I changed to standard vga...

I have a G8-SIN1394XP running W2k (happily for last 18mths) and I tend to put the machine into hibernation rather than standby because the fans switch off as well. Last couple of weeks, when I go to reboot out of hibernation, the machine POST's and hangs right before the memory amount is displayed...

Just put together a system, with a k8vnxp and a 3200+ ( newcastle)cpu. no temperature problems,but the fan does not spin any more than 3013rpm, No matter how hot the CPU gets it doesnt spin any faster.( like its suppose to re F5 bios) The highest the cpu has got is 47 degrees, the lowest 36...

On bootup of Windows XP Pro I have a 45sec delay before the desktop finishes loading. During this Nortons Auto Protect is disabled and then enabled after this 45sec delay. This only happens when I have a cable plugged into the onboard LAN port. Can anyone help me with this problem? My system...