|
|
Gigabyte Board and ATA 100 by
T Thome
"Just Wondering" wrote in message
...
2 of my 3 hard drives are ATA-100 while the 3rd is ATA 133, my CD burner
is
ATA 33, a standard thing I guess. I have master/slaved the Burner
(samsung)
and my...
|
|
0 |
1,314 |
|
|
GA-7vaxp and Barton 2500 overclock by
avqpilot
Hello All,
I recently swapped out my 2100xp with a new Barton2500 and added a 2nd
stick of ram.
I was a little disappointed that my ram got stepped down to a bus size
of 333 from the 400 level I had the single stick at before. I'm
using Corsair XMS512 PC3200. On the other hand, I did increase...
|
|
0 |
589 |
|
|
DMA problem GA 7zx-h by
Jos Coervers
U have a DMA problem with my motherboard GA-7zx-h. I can't set de DMA to my
hard disks.
Is the problem solved when I upgrade the BIOS? 3 Weeks ago my motherboard
was resseted en since that day I can't set the DMA.
Thanks.
JC. (sorry for my English)
|
|
0 |
407 |
|
|
|
|
0 |
671 |
|
|
8KNXP Memory Capacities? by
Jackson
I'm building a computer that will be used for heavy duty 3d work and for
working with massive photoshop files. Want I want to configure is a 1
gig ram disk and 2 gigs ram for the os and applications. I bought the
8KNXP board and three gigs of this memory:
http://kingston.com/hyperx/
1GB Kit (2...
|
|
2 |
833 |
|
|
Help! Drive Image Program for SIL 3112 Controllers? by
Helen Chevy
After using Acronis True Image to make a successful image of my c: drive,
which is made up of two SATA Raptor drives on a SIL Raid 0 (Gigabyte 8INXP),
I find this program cannot restore the image. If I try it in XP, it can't
get around the services; if I try it outside of XP, it sees only...
|
|
2 |
511 |
|
|
8INXP or GA-7VAXP by
Richard Dower
"fabien" wrote in message
...
Howdy all:
Is anyone running one of the subject boards? I am trying to decide which
way to go - either Pentium or AMD.
INTEL!!!!
|
August 22nd 03 06:30 PM
by Jeff
|
2 |
483 |
|
|
8KNXP F6 Final Bios & low latency memory by
Bob Davis
I didn't know it was available 'til you posted this note, but I installed it
and it works fine with my Kingston modules. In fact, both Memtest86 and
Sandra show 3-5% performance increase with no other changes.
"Alphad" wrote in...
|
|
0 |
1,014 |
|
|
Thanks Tim, IDE 3 Now Works With Single HDD by
marcusD
I appreciate your patience and help with my IDE 3 setup. I finally got
it working. For others brousing the newsgroup, here's the fix:
Select the Integrated Periphals tab in Bios and change the GigaRaid
Function from RAID to ATA. Set the SCSI/Raid Control Boot
Order to make ITE RAID first on...
|
|
0 |
327 |
|
|
FSB vs External CPU clock by
luk chiu ming
I saw lots motherboard BOIS has a line called External CPU clock
what's it's difference between FSB and external CPU clock?
in BOIS i usually saw people set FSB=166MHz for AMD motherboard.
but i also heard P4 CPU has 400 / 533 / 800 MHz FSB.
would that means AMD CPU is much slower than P4's?...
|
August 22nd 03 10:49 PM
by Fred
|
3 |
365 |
|
|
8KNXP: where can i find IDE driver? by
klausa2
Hi,
I just bought a 8knxp. I was planning on using my existing maxtor
120GB drive with installed W2K. So I hooked it up to the IDE1
connector. POST went well, I even got a short W2K start up screen.
Then: Blue screen, INACCESSABLE_BOOT_DEVICE. Seems W2K doesnt like to
be transplanted from one...
|
|
3 |
903 |
|
|
VRXP and 2 more questions by
Tom
What's the fastest processor that works in a GA7VRXP?
What's the story with 3rd party bios I seen floating on some websites? An
easy boost in performance /multipliers, or strictly for the hard core OC'er?
What's the difference between and XP2100 and 2100 Rev.B?
Thanks,
Tom
|
August 23rd 03 03:27 AM
by Tom
|
0 |
361 |
|
|
GA-7DPXDW-P Does Not Boot by
rob
Hello All,
I just bought a new GA-7dPXDW-P. I have installed one of my old working 1GB
buffered ECC modules, both MP1900+ and a ATI 8500. Also I connected the cpu
cooler/fan, the power on/off, reset, and speaker connectors. My power supply
is the Turbo-Cool 425 ATX. Now when I try to start up that...
|
August 23rd 03 09:21 AM
by rob
|
1 |
335 |
|
|
dual channel by
luk chiu ming
i always heard of the term Dual channel in DDR ram
Dual channel DDR266/333/400MHz
what's dual channel ?
|
|
1 |
470 |
|
|
dead on-board ethernet by
Hervey Cleckley
any diagnostics for the MCP-T ethernet? mine just stopped working. checked
all of the lines, re-loaded winxp, but i kept getting fail to connect
messages. my laptop connected fine through USB and now my system is up on a
3Com PCI card. is my chipset a dud? it worked for 2 months.
HC
|
|
0 |
499 |
|
|
GA 8KNXP CPU Multiplier? by
Timothy Drouillard
Go into the BIOS setup then hit ctl-F1. that give you access to the
'advanced' settings.
Or.... Install 'Easytune' and do it from within Windows.
"marcusD" wrote in message
news:eiN1b.4830$n94.2530@fed1read04...
Where in the Bios can the CPU multiplier be changed? Or...
|
|
0 |
593 |
|
|
Driver update by
Dragon
I am running a GA 7N400L1 mobo and on gigabyte site it gives you a nvidia
patch download, do I need to install this patch and also what chipset driver
version am I running as I installed the one that come with the mobo and on
the site they have 2.41, how do I find out and do I need to update to...
|
August 24th 03 02:50 AM
by Dragon
|
0 |
435 |
|
|
Correct settings for athlon 2600xp and 7vrxp? by
John
Anyone know what bios or jumper settings are required for the above cpu on
this board. I have the F12 bios installed.
Currently it boots as a 2000+.
Thanks in advance
John
|
August 24th 03 07:29 AM
by johnny
|
1 |
572 |
|
|
where can I get a GA-8GE800 driver CD? by
Demosthenes
The software downloads are useless or hard to use from the Gigabyte
website..
Can anyone make an image of the GA-8GE800 Pro driver CD and compress and
post it to me or tell me where I can get the driver CD or bundled software?
Thanks!
|
|
0 |
307 |
|
|
How Overclock MB GA-8SG667 by
Marco il Magico
How i can oveclock my Gigabyte BIOS?
What i must change in the BIOS?
I see a lot of number....
P4 2.4 GHZ FSB 533
VIDEO ASUS V9280 GEFORCE 4
MB GIGABYTE GA-8SG667
DDR333(PC2700)
FAN Cooler Master DI4-7H53D-0L
|
|
0 |
354 |