I am thinking of upgrading the graphics card on my GA-7IXE4 m/b from a GeForce MX2 ( 32Mbts ) RAM to one of the 128 Mbts /256 Mbts graphics cards due to pressure from my grandson now that DOOM 3 is out ! However I suspect that this will fail to improve the performance of my PC due to the age of...

Does anybody know a link for download the EasyTune 5 version? Thanks, Moritz

I'm running WinXP Pro SP1 with the PDC20276 on my GA-8IRXP mobo as an ATA Ctlr for 2 UDMA HD's. I keep getting out of date firmware messages in Event Viewer, - anyone know if there's a more recent BIOS version that 2.20.1.12 for the PDC20276 chip, and if so, where to get it.? Gigabytes site doesnt...

Hi I have a GA-7VRXP and an AMD 2000+ cpu. I am getting 1250MHz on my poweron screen. I thought the AMD 2000+ would give me atleast 1.67 GHz. I went into bios and loaded up all defualt settings. I have set the jumpers on the mainboard as default jumper settings. With everything in default mode,...

I am trying to install windows on a single SATA Western Digital drive. But for some reason windows does not see the drive. Does it matter what SATA connector I use? If so which one is the right one? The manual does not say.. Also could it be that I need the Raid drivers installed during...

I have a GA-7N400 Pro motherboard, XP3200 CPU, FX5200 AGP graphics and two IDE Hard drives (40gb and 80gb). Windows XP Home ................All is working fine. I have decided to replace my two IDE Hard Drives with a SATA ( Maxtor 160GB). When installing the Windows XP Home (using F6 etc) the...

Does anybody know a link for download the EasyTune 5 version? Thanks, Moritz

wrote: Hello, I have upgraded my 1Ghz Athlon to a 2600xp Athlon but in the bios screen at boot the temperature of the 2600 is 70C and Windows will not load (I suspect it gets too hot halfway through). The cooler master heat sink is rated up to xp3200, and it is fitted...

Hey guys, I have a oem Gigabyte motherboard, It was used by Micron and I think maybe Compaq. Gig-a-Byte does not support it and the manufactures that used it in there computers are either not in business anymore or did not write anything on the system level. I need to know the Front header pin...

Considering this as an alternative to the MSI K8N Neo Platinum I was going for. Don't need the Gigabit Lan, Raid, or 7.1 sound of the MSI. Any thoughts on this? Thanks in advance -- Derek

Hi there, does anyone know if it is possible to power on the board connected to the standard (on-board) RJ-45 connectors or do I have to install a seperate NIC an conect a wol-cable to its app. connector on the board. If so, what MAC-Adress do I have to choose? Monz

the above board loses its bios settings after powere is disconnected...as long as it is connected to the power the settings hold fine...the error given after a power disconect is "wide range protection" and it beeps alarmingly like an ambualnce siren until i load setup defaults in the bios and...

Hi, I need a manual for the Dual PPro mainboard "GA-686DX". Please anyone post a link where I can download it. thanks, Oliver

Hi: Anyone know where such item might be Available. I bought a motherboard but no install CD can with it. Thanks in advance. --

Since June 15th, I have been testing XP Pro on this setup and have not been able to get it to play video and audio off the Adobe Premiere Pro 1.5 timeline without stuttering. The audio drops out. I got an answer from the Adobe folks to this effect: "It's your motherboard. I know because I had one...

Imagine getting paid $1000 everytime you refer just 20 people to our vitamins. The Greatest Vitamin in the World is one bottle of vitamins that nutritionally supports the entire body. This vitamin is endorsed by the NBCCA representing most teams in the NBA! It also has the Gold seal award for...

Hello all: Having trouble figuring out what memory to use in a GA 7N400-Pro It is revision 2 Processor - AMD 2600 Barton Memory is an issue ... 3 GB maximum? Anyone tried this? DIMM 1 - 1 GB / PC 2700 unbuffered / Non ECC - 128meg x 64 double banked

I have some problems in using the USB2.0 ports with my PC. I have a GA-8SG667 motherboard and it "seems" to support the USB2.0 standard (I have a total of 6 USB2.0/1.1 ports). I have WindowsXP SP1, so i haven't installed any external driver because it natively supports USB2.0. When I try to connect...

Have GA-8IR533 mboard. Want to use QFlash to upgrade BIOS from F3 to F4 or F5. QFlash displays flash type/size as WINBOND 49V002F with a 256 file size. DL'd upgrades are more than 400K in size so I get a file size incorrect message. Can anyone tell me what's wrong

http://12.24.47.40/display/2/index.asp?c=12&cpc=ULwO0A442oKs512Q04X5i0UupP4SveI6dt2WJi7&cid=2&r=0.2709162 Silicon Image have updated drivers....grab 'em!