I am looking for a driver for the integrated Ethernet Controller on a Compaq Deskpro EN (convertible midi tower). It uses the Intel 82562 chip. The downloadable drivers at HP Compaq are huge (66 Mb) Do I need to download this or does anyone know of a smaller driver that I can download which...

Need badly a recoveryCD for the Smartstation Docking station for the Compaq LTE Elite 4/75CX Please a copy of this CD Thanks

I need a language disk 1 (b34) to complete a restore. I requested a current set of restore disks and they were shipped out on on Oct 30, 2003 from the Toronto location. I get the same request for a language disk from the new restore disks -Compaq part number 124811-402. I have done a full scrub...

The embedded NIC of the DL380 G1 is listed everywhere as being WOL-capable. Using the system tools (HPASMCLI under freeBSD in my case) I can *enable* WOL, and HPASMCLI even reports that it is successfully enabled. After a power-down and -up again, the status is still *enabled* BUT it never wakes.

I am working with a local charity to try and revive a donated, 'slightly used' Proliant. It's a rack config, G1 with the 1Ghz processor and fully populated with 9.1 G drives (12). The boot is currently set up on a Smart Array Controller (bios says SAC 431) and controls the first 6 drives fine. I...

I have a Proliant 800 that needs a memory upgrade, I would like to max it out but I am not sure what the largest DIMM it will take is. It has 2 x 400MHz Pentium 2 processors and currently has 256 MB (1x128 and 2x64) of PC 100 SDRAM. I have looked at the manuals on Compaq's web site for Proliant...

Inherited a Proliant 3000 - 512MB Ram - 7-9GB drives - runs startup ok - after scsi check - says something to affect that drives have been moved arond - need to run ADU (or something like that) I tried downloading the ADU from compaq, but evendentally it is not bootable - any help -...

This worked for me – received a system that had been working fine and when I powered it up I had the same symptoms. Turned out something had worked loose during transit. Unplug every card you can - CPUs, CPU sleeper cards, main card, memory riser - everything you can, and reseat them all - hey...

What have I done wrong? I've a proliant 5500 that seems to be a happy bunny, running SBS2k, twin CPU, plenty of RAM etc, and a Compaq RIB 56k part 294040-001. Becouse of the full length of the RIB, and with a 'handle' on the end, there is only one PCI slot it'll go in, BUT the smart start utility...

I am pleased with the Compaq Proliant line of servers, been running on them for years without a single issue. I have aquired many systems and have access to many more at any time. If there is anyone out there in need of parts or systems please feel free and inform me of what you need Im sure I...

I have 32 sticks of 256mb chips that came from a sun quad processor server, these chips fit perfectly into the proliant 6000 or 7000 server, the system turns on and registers 8gigs of physical ram but shows up as not compaq memory, and chooses to lock up during boot. MEM-CRI-256MB ...

After doing some searches in here, I have read that you can not set a pci ata controller as the boot device on Proliant systems. However, I also came across the only system that supports ata hdd's is the DL320. I happen to have one of these systems, a DL320 G2. Unfortunately the product that I...

When using SYSTYPE from the SmartStart Scripting Toolkit the utility may return "unable to determine system ID" when run on an HP/Compaq server, even with the latest SSSTKSYS.INI that recognises the particular server. The solution is to only run the utility under DOS/Win9X. It consistently returns...

DK Does anyone know the pinout for the serial cable that is supplied DK with DK the Compaq R6000 ( 6 kW, 6 KVA, rackmount) UPS? I have one, but DK DK don't DK have the serial cable, and would very much like to use the UPS to DK shut DK down a computer when batteries are near exhaustion. DK...

I have a Proliant 3000 rack model with two Pentium 2-400MHz processors. They are both initialized at startup, but I don't see them in Windows 2003 server. Before Win2k3, there was a Win 2000 professional installation on the server, but that one didn't see the processor either. Any ideas on how...

During the installation of a Proliant 1600 server I made a mistake that I didn't notice until last week. Instead of putting the first two hard drives of 9GB in a Raid 1 configuration (Mirroring) I seem to have made just a large disk of 18Gb that is partitioned into a C: drive of 4Gb and a D:...

Hello I have RA4100 FC Array and I want to attach it to Debian or RedHat host. Currently I have 12 harddrive in the array and I have configured that disk from windows (3xRAID5). Logical volumes are visible under Debian. Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: COMPAQ ...

I have been trying to upgrade my DL380 G1 (PIII 1Ghz dual proc.) server to Windows 2003 old config had 18.2 GB Ultra 3 10K hot swappable hard drives in a RAID 5 setup. I started over with 72GB Ultra320 (was told they would be backwards compatible). During the text (beginning) portion of the...

Just rebuilding a Proliant 5500 and ran array diagnostic and it asked me if I would like to see the faults. "Port 1 Drive 3 is not stamped for monitoring" I've now swapped out the drive for a spare and the rebuilt array reports 'no problems detected'. What's with the other drive and can it be...

I'm about to get my hands on a dual channel 3200 controller, do these specifically need a point-to-point 68pin cable or will they run with a standard terminated or unterminated cable? I'm guessing the cage terminates internally, so I would assume a cable with a terminator is a...