Hey all, I just purchased this board. It has: 2800+ barton 512 pc3200 auto clock settings, 166 fsb set on the board. First, I had a hell of a time getting the fsb, autoclock settings right, it would boot fine with the clock jumper auto setting to off, but not with it on, so I was getting it to go...

I have the Gigabyte GA 7 AVXP Ultra motherboard and it accepts upto 3 gig of ram, Updated Bios to F6 version, pc runs GREAT (no overclocking) amd 2100 athlon, using 2 crucial 512 sticks of 2700 ram, I added one more stick of ram to make it 3 sticks of 512 and the computer goes nuts and reboots on...

Hello, I have had my GA-7VRXP for the last year or so and I had a AMD 2100+ and it was working fine. I have just replace my CPU with a AMD 2400+ but I cant get the MB to recongnize it as a 2400 it sees it as a 2000. I have it set a up as auto (on the dip switch)? What am I doing wrong?

I'm considering building a new system around the Asus P4C800 E Deluxe but with so many different types of RAM around I'm a bit confused. What is the most fastest and stable memory I can use in this board to give me at least 1G of RAM, and do I need one 1024MB stick or two 512MB sticks? Below...

Does GA-8IHXP (Rev 2.1) support 250GB drives? BIOS has been updated thru F7 2002/10/4. The explaination of the last update F8 does not mention big drives just HT technology Please help! Thanks

Hello, Right now, I'm using an SATA hard drive as my primary one. I have that mapped to the IDE Primary Master channel in the bios. I have an IDE hard drive & DVD drive on the IDE Secondary Master & Slave channels. Can I use that IDE Primary Slave channel in any way? Or does remapping that...

Hello Folks, I need a recommendation for an AMD board that does onboard Raid. Integraded sound, SATA, and Firewire are not required. What kicks ass and is less than $75US ? Thanks, NuTs

Quite often when I return to my PC after it has been in standby mode I find that it is emitting a steady tone through the PC speaker. Moving the mouse or touching a key brings the system back to life and the tone stops. I tried disabling the fan speed and CPU temperature warnings in the BIOS "PC...

(Also posted on alt.comp.periphs.mainboard.giga-byte) Hi all, Here are the relevant components : 8KNXP FB motherboard 1 GB memory (2x512) 80 GB IDE HD (WDC) DVD drive

Just installed a GA-7DXE motherboard with an athlon XP2600 Thoroughbred cpu. When I boot up, the system only reports the cpu as a 1.1 ghz. On m/board is an option to change cpu speed from 100 to 133 but if I change from default of 100 then system will not boot. This mothorboard is advertised as...

Sorry, if this is a bit long, want to specify the problem as clearly as possible. I'm a hardware newbie and I just upgrade my Pc recently. So after i installed the hardwares. I installed several softwares in the following procedu 1)use the win98 startup disk 2)format hard disk 3)install...

Hi there, i've just got a new Gigabyte 8KNXP Rev. 2. I've configured a RAID 1 array with 2 Maxtor Maxline Plus II 250 GB on the Silicon Image 3112 onboard S-ATA Raid Controller. Configured as Raid 1. So far, so good. My problem: If I configure a partition with FDISK or a similar tool and do a

Woger MKII @wogerbox.co.nz wrote in message ... My Local dealer has now confirmed that the current stock here of Gigabyte GA-8I875 Ultra boards are Rev 2 with a Yellow mounting bracket as per the bottom Full Pic.. Still at it? I'm...

I am considering buying the 8KNXP motherboard as from the reviews I have read it has the best feature set combined with the performance and support options I am looking for. I have a few questions however that I can't seem to work out from reading the web and would be very grateful if anyone...

DavidM wrote: Hi all, I built my own computer some time ago now and at that time I selected the 8hixp board. I could not afford a lot of memory so stuck in two sticks of 128 x 16 - 4/128 non-ecc memory. I would now like to upgrade the amount of memory by adding two further sticks of...

OK, I read a bunch of old notes about problems setting up Raid with the 7VRXP motherboard. Here's my setup: IDE1 Master 18GB system and stuff - boot disk IDE1 Slave 40GB IDE2 Master CDRW IDE2 Slave DVDRW IDE3 Master 160GB Removable carrier (master? of a security array)

Hi folks I have a 7n400 pro2 and I want to add a Game port. I see in the book that there are pins on the MB for a Game port .But Mb's used to come with the cable and connections None came in my MB box, does that mean I now have to go out and buy a special Card or a special Game port to plug into...

Can SMART for HDDs be enabled on this board? Can't find it in the BIOS. Steve

On the Giga website for BIOS F6 it says: "Note! If your OS (like WinXP) is already installed on SATA HDDs under ICH5R controller, please make sure to update ICH5R SATA RAID driver from our IUCD 2.4 or Gigabyte website first, then update bios F6." I have one SATA HDD under ICH5R controller. Cannot...

Hi, I've just bought a 8ik1100 board and just install a floppy, no Hdd, no OS. I have the FA bios and I try to upgrade the Bios to the F8 version but I always have the same error, by the floppy with flash872 or by the Q-flash utility on bios setup Something like "Bios ID error" What's the problem?