"Lloyd LaBaw" wrote in message ... either try reseating your processor or maybe reseat ram for initial boot. "Dave B" wrote in message ... Hi All, ...

I've tried and tried to connect the IEEE1394 connector to the case front panel (Skyhawk PSR5619), but I have had no success. It *should* be easy as all the plugs that go on the pins are separate - so no rewiring to do - just matching the plugs to the pins. The board has 9 pins: 12345 6789X

Works a treat exactly as Bob says. Quiet? Definitely. If you want the DPS in, remove the fan - it runs cool anyway. Also, consider removing the fan for the nortbridge chip. If you want, put a zalman nb32j on the northbridge *during* assembly for better cooling. With a digital sensor on the outside...

Can I install pc133 sdram in this board or MUST it only be pc100. I have a pc133 128Mb module that works fine however the kingston 256Mb pc133 will not work. Whats going wrong? Any suggestions? Newt

The Geil 512 paired modules are very attractively priced ~ $220 for 1G 3700 sets. The CAS etc settings are not the most aggressive, however, it appears the FSB speed is more important than the memory settings, at least for performance. Has anyone had any useful experiences with the Geil? At...

I got bored with the "Standard Dual PCI IDE Controller" in Windows 2000, so I put together two INF files by combining stuff from the Intel INF files (which basically only installs the standard pci ide driver with another name) and from some of the nForce 2.45 drivers. The result is this...

Hello all, When the GA-8SQ800 came out, Giga-byte said it (or rather, the SiS 655) will have support for the 800Mhz Pentiums. Does anyone know if this is indeed the situation? if it is not, is Giga-byte/SiS actually working on it, or will 533 be the best I can get? Thanks, Uri

A colleague recently purchased a new computer, an Athlon 2800+ with 3*512M PC2700 RAM and a GA-7VA motherboard. I have tried to install Linux (Redhat 9.0) on it, but it consistently aborts during the installation process. But, with any two of the three DIMMS in place the installation is...

I can't reach 3GHz with 2.4 P4C.... Actually; fsb:241 ratio 5/4 with xms corsair 3200 (2,3,3,6) +0.2V Vcore just under 2.600 temp: 43°C with intel fan Any Idea ??????? Steph

Hi everyone, Any thoughts on this board? Is it new? I haven't seem much around in ways of reviews for it and am probably going to pick one up later. Any opinions appreciated. Thanks.

The subject basically says it. I've reset the bios, tried a couple different drivers. The gigabyte website says to use some Sigmatel drivers, these register as not working properly. Its kinda silly, thats with a manual install. The automated installer doesn't even install anything it seems. The...

Right as you will know this board uses a Dual bios, my problem is that my main bios is knackered and so it keeps booting to the second.When i try to update the bios,which i was wanting to do anyway, i keep getting the message "Error Bios protected" I cant update the bios can anyone help...

On Mon, 25 Aug 2003 13:50:48 -0600, luckyflyer wrote: Greetings, I know I have seen a post regarding the realtek lan chip going to sleep issue on this groupin the past but now I can't find it. I've called Gigabyte tech suppot and the person there acted like he had never...

I have a GA-8IPE1000 Pro and need to find the optional 6-channel audio bracket (SURROUND-KIT). Does anyone know where I can buy this optional bracket?

Ok things are up and running and new RAM on the way... How come my AMD Barton 2500+ shows up as and AMD Athlon 1900+ at 1.47 ghz speed in the bios and in windows XP? What's the deal? -- Frizzle

I have had errors in the past like this when the master and Slave settings are incorrect on the drives. Worth a check...... "theo" wrote in message ... Into my computer the BX2000 mainboard, upgraded with the F9...

I've been following this group for quite some time, and I do not recall reading any, or at least very few problems with the 8KNXP; so I bought one. It works great, no regrets at all. I also considered the MSI FIS2R before making my decision. "John Con" wrote in...

"Sir Pudgie" wrote in message ... Will a 1.2 Ghz Athlon (Thunderbird) with a 200FSB work OK with a GA-7DXE motherboard. I will have some 2100 DDR RAM also. Anything wrong with this combination, and will the DDR RAM...

I needed a board with extra ide controllers as I've got too many hardrrives, Just had a look at the specs on these boards: seem really similar. Both have the ATA (non serial) raid option, the GA-7N400 Pro doesn't have 2 network cards but that doesn't bother me at all. The 7NNXP has some...

I have read lots about the LAN problems with the pro version of this card, and everyone says upgrade to F11 of the bios. I have the same problems with the pro2 version and have upgraded to F3, the latest version, and still cannot get the LAN card to work. Has anyone any ideas how to get...