I am looking for a skin/theme made for Abit that may be included with the software package that comes with MB/video-card purchase. A screenshot: http://www.skinplant.com/preview.cfm?skinid=198&img=10/ABIT_ss.jpg This skin is made to run with Windowblinds, a GUI enchancement program which I...

X-No-Archive: yes On my P4 TH7IIRAID board I am using a P4 3.06Ghz processor with a 533Mhz Bus. Settings a 133 FSB 23 x Multipler CPU Default Voltage

I've got a vi7, and 2 sticks of Corsair 256M ddr400 mem. the mb came w/ ver. 15 of the bios. I was able to install xp pro with little trouble, but after a couple of strange BSOD's; I decided to run a memory test. I used memtest86 (v3), and discovered that test #5 had some failures - and ONLY...

Hello -- I have a VP6, that has suffered damage around its CPU sockets. While i= nstalling a pair of Socket A/Socket 370 waterblocks, some of the SMT devices arou= nd the CPU sockets have been knocked off. Does anyone know where I could find information regarding the nature an= d ratings

I have two sticks of 256mb PC-150, one from MCI/MDT and the other from Corsair. The system only registers 384MB's upon system boot. That and the system reports 128mb sticks installed in banks 0/1/3. I already replaced the capacitors with high quality Panasonic caps.. So that isn't the...

Has anyone had any problems getting their deposit back on a warranty exchange or any other problems with the exchange? Thank You Sandy *** Free account sponsored by SecureIX.com *** *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***

can't get to http://www.abit-usa.com

Almost two months ago I put together a new system using the following an Intel D915GEV mobo and ABIT's version of the ATI RX300 SE-Guru. This is a PCI Express video card that allows for easy overclocking, but I didn't overclock. It ran fine for almost 2 months, then suddenly the video started...

Is anyone else as unimpressed with Abit's RMA as I am? I returned a video card, being careful to include all the manuals, cables and CDs. All I received is a bare card. No cables. No CDs. No manuals. It even came in a box that looked like something bought used off ebay. No explanation of what...

Hey all, Just bought new nf7-s v2 installed 120gig wd sata drive and 80 gig ide i push de; to access bios and sometimes it lets me in sometimes it doesnt. When it doesnt it goes to a blank black screen with a thin blue line at the bottom and a flashing cursor at the top. i have the latest bios...

Could anyone advise if Adaptec 2120S u320 SCSI RAID Controller (64-Bit PCI) on a KV7 (32-Bit PCI Slots) is OK/Possible?? Per Adaptec FAQ's, thier 64-bit controllers should work in 32-bit pci...

Adding a heatsink to the Southbridge helps, WHAT ? Just like to knowgot some double sided thermal tape and some heatsinks lying arround might as well put them to some good ? Thanks. HELLO NURSE.

I am currently using a KX7-333R mobo and I have 3 sticks of PC2700 512MB memory. I have followed the direction for loading the memory into the DIMM slots (ABIT goes 4 to 1) and everything seemed to work great. then I started getting a blue screen doing a memory stack dump. I then removed...

Hello,i have a BE6-II mobo which has bios QJ (01/02/00) on board and i currently have a pentium 3 500mhz slot 1 porcessor on board. I was considering upgrading bios to latest version 70(3/12/01) according to abit.tw website. This would allow P3 1GHZ (133 mhzfsb) compatibility. Are such bios...

Sisoft Sandra Performace used to report half the expected (with reference to the CPU) , after many tried i figured out that by altering the drivers from nforce IDE to generic IDE the Performance doubled (means more or less same like in the reference database of Sandra 2004) system used to go busy...

Hi all, I bought an AG8 3rd eye motherboard with P4 530 CPU, kingston 512 mb DDR PC3200 and ABIT 300XE PIC-E SVGA. Since the first time I get a problem to boot up the machine, that freeze the system during the BIOS sequence just after the recognise of the processor. The monitor freeze with the...

AG8, 3.0 GHz i630 Chip, 1GB Geil DDR500 Ram. Running happily at 3.7 GHz (247 fsb), Sotck Voltage on everything, BIOS Rev 24 - I've encountered some quirkyness with this board, works the same in the BIOS screen, or uGuru: 1) To overclock, I have to bump my FSB at 5-10 mhz increments at a time....

Hi folks, Here's the system specs, let me know if I'm leaving anything out that my help troubleshoot this problem. I bought an Abit AG8 with a 2.8Ghz P4 (retail with the stock fan for the CPU. Upgraded the BIOS to the lastest (17).

Trying to help my daughter build a PC. Installation was going well until the middle of trying to install the operating system. Screen went blank and everythiong went dead. System no longer gets power. POST led works and is cycling 83, 96, 9F. System configuration is Abit AG8 motherboard, Intel...

I have a PC with a KG7 motherboard - according to the manual this has the AMD 761/VIA VT82C686B chipset. I have just purchased a new 3D graphics card and the manual has advised that the first step in the installation process is to install AGP drivers for non Intel chipset based motherboards. I...