Ok here's the deal I am currently running an Abit KT7-raid mobo at raid-0 The board is suffering from the electrolytic capacitor failure. I was able to find a new KT7a-raid board on e-bay and purchased it Now the question is,can I just transfer everything over to the new board including the...

Hey Gents, I've got two SD7's. One had been returned to Abit quite a while ago and not tried until just now. The other worked fine, but I pulled it out to try an Epox at home for a few months. Now I have to use the Epox at work, so I'm trying to get an SD7 working at home. Basically, I get nothing....

Hello, I have XP installed running the KT7A-Raid motherboard with 384 MB PC-100 memory and a 1600+ XP Athlon CPU without windows XP installed I had all sorts of errors and of course windows XP would not install on this computer. I do of course have XP installed now but I had to put the hard drive...

Hi there, does anyone know if it is possible to activate power loss recovery on a KT7A mainboard? I can't find the appropriate setting in my BIOS. Should I upgrade the BIOS or isn't it supported at all? Maybe there is a hardware method? I tried shortening the Power-On button, but it didn't help....

Hello, When I run certain software on my computer running an AT7-Raid motherboard I get lots of Hardware failure stop errors in windows XP when I run one game specifically "Divine Divinity" and when I run enter the matrix windows XP crashes on a sound card driver. I am running an Athlon XP 2000+...

I have a HP- cd rw device that I know is OK from hardware standpoint ( tested on another PC), but on my ABIT KG7 RAID system, hangs up at the end of a cd burn. ( the green light on cd burner flashes, and the burning software becomes unresponsive.) This occurs independently from which program is...

This is the second time I have lost a motherboard when flashing a BH6 motherboard (the only 2 times I have had failures). Anyone have any idea's how to recover from this. I know this is an old motherboard, but it honestly angers me that both time it was a BH6. Just looking for some suggestions.

Hi I have a problem after I upgraded from duron 600 mhz - xp 1700+ and 256 mb ram - 2x256 mb 1xPC2100 and 1xPC2700.. Now memtest86 counts LOTS of errors in test 5 - but the blocks are OK in my other machine. How can I fix it ? The pc doesn't run faster after upgrade, and there is problems with...

Hi I have an old abit motherborad ABIT PH5 but have a problem with it: the old bios those not want to "see" my cdrom, and there is no option to boot from cdrom. Its not a fault of a cdrom, jumpers(master/.../...), cabels, or anything of this matter. I tried to update the bios with awdflash 7,36...

Question - what kind of demand do you think there would be for personalized case mods where you could have your name/nickname cut in the side of your computer case? What do you think people would pay for this? I ask because I have access to a laser cutting table at work and I am good at CAD. I...

Hi, I'm thinking of buying two SATA hard disks and using RAID 0. Is this going to give me a substantial performance increase? i have read somewhere that i'm still limited by the ATA100. Thanks for your input

I have a th-7 raid board with a 1.8 g processor and am trying to use 2 128 mb samsung rimm memory sticks with the enclosed c-rimm. I have installed as per the manual with the memory in slots A1,B1 and the crimm in slots A2,B2 and reverse with no success. I receive a post code response of flashing...

I am having a problem with a KG7-RAID motherboard. I have 2 256MB PC2100 DIMMs (in slots DIMM4,5 and DIMM6,7) installed and would like to add another 512MB PC2100 DIMM. The system runs well with just the 2 256MB DIMMs. When I add the 512MB (in the slot for DIMM2,3) the POST tests the memory as...

Does anybody know how much power the NF7-S v2.0 consumes?

This has worked for me many times and on several boards. Peel back the label to expose the bearing. Add one drop of oil, place the label back making sure not to get the label oily or it won't stick. On Thu, 14 Aug 2003 12:55:46 GMT, Brian Brunner wrote: On Sat, 2 Aug...

Having a problem with xp crashing when using the SATA adaptor on an ATA100 IDE drive. Shortly after getting the desktop I get a blue screen with error message that ntfs.sys tried to write to read-only memory. I dont have any SATA drives yet, but until then I wanted to use my WD120 on the on-chip...

I was wondering if this Memory works with the NF7-S. The Memory Config at the site does not bring it up for this board. Kingston HyperX KHX3200/512 512MB DDR400 PC3200 Memory w/Heat Spreader a.. New HyperX Enthusiast Grade Modules: a.. Designed and built by the world's largest independent...

Hi. I have recently upgraded to XP and was wondering what drivers I need to install on my PC. The only one I have updated so far is the VIA hyperion from Via arena.

Do the new abit IC7 boards fix the sound issue? Crackling etc?

Hi, Can anyone recommend a desent slot A motherboard. I have a pc that needs one and won't be doing any overclocking or anything fancy. thanks