|
|
OC CUSL@-C and 1.1Ghz by
Augustus
"Hugh Sutherland" wrote in message
...
I have an CUSL2-C and a Tualatic 1.1Ghz chip with adapter. I have the
latest bios (beta version still) and I want to know what I can saftley OC
this cpu to. What voltages and FSB...
|
March 30th 04 06:48 AM
by P2B
|
1 |
845 |
|
|
GF 5900XT > overclocking by
Web Wiper
Hey,
I bought myself a Aopen Aeolus Geforce FX 5900XT 128 DDR ... nice board with
a basic
setup @ 300/700 (2D) and 390/700 (3D). It has a big cooling fan on the GPU,
reaching over
the memory blocks (but not quite all the way), so I'm afraid the mem isn't
refreshed all that much.
pic:...
|
|
0 |
995 |
|
|
|
March 29th 04 08:21 AM
by LRB
|
5 |
909 |
|
|
|
|
0 |
1,452 |
|
|
p4p800 deluxe P4-2.4-C overclocking problems by
dorgold
hi
i have a p4p800 deluxe rev 1.02 (BIOS 1015) with a pentium 2.4C CPU
with 2x256MB TwinMos PC3200 DDR ram and a 360 W PSU
whenever i try to set the Bios´ AI overclocking feature to any other
value than standard(10%, 20%, 30 %), the board cannot boot and i get
the "overclocking failed" message. i...
|
|
2 |
1,722 |
|
|
80mm vs 92mm Fan? by
Wayne Youngman
Hi there,
I am trying to decide what size fan to buy for my current P4 build. I am
not sure whether a 80mm or 92mm is best. AT first I thought 92mm was the
way to go but after having read a few reviews around the web it seems like
the 80mm fans are giving better performance due to their...
|
|
7 |
1,545 |
|
|
Used to overclock, but now problems by
Rich Sias
I was overclocking a dual celeron 366 to 550 and sometimes more until last
summer when I had difficulty installing some software for work. I Regular
clocked it to install and run to not have any problems. Now I can't set it
back. I must have changed the numbers in my BIOS too much. So I tried...
( 1 2 3)
|
|
29 |
2,392 |
|
|
Intel® Pentium® 4 - Little Black Hole on top? by
Wayne Youngman
Hi,
having just installed my first P4, there is something I wasn't sure of.
What is that little black hole on the upper surface of the CPU?. I was
worried about getting any AS/3 into it when I was applying the thermal goo.
.. .
thanks,
--
Wayne ][
|
|
8 |
1,392 |
|
|
Dual Xeon P4 Question by
Dennis E Strausser jr
What are my chances of getting another water block.
http://mywebpages.comcast.net/dstrausser33
And running it on a Dual Xeon system system?
My question is, will the Water pump be able to push the little bit extra
water
And add another Radiator to the back of the same case.
System on pics is running...
|
|
3 |
1,642 |
|
|
P4-How should I overclock it? by
Luciano
I have P4 2,4 ghz Northwood, abit IT7 MB, radeon 9500, maxtor 60gb,512 MB
DDR ram and know nothing about overclocking. What should I do?
THX in advance and greetings from Croatia.
|
|
4 |
1,303 |
|
|
micro-atx MB on atx case by
Lucas
i just wanted to know if its possible to set a micro-atx motherboard on a
ATX Case? I think so, but i'm not sure... great thanx
|
|
2 |
1,068 |
|
|
XP2500 Barton Overclock Failure by
Simon Bale
Hi,
I have an XP2500 Barton core CPU and I would like to try and overclock it to
2200Mhz. I have done some initial tests and I can't seem to overclock the
CPU at all. Increasing the FSB by only a few MHz causes windows to fail to
boot. An attempt to clock the FSB to 200MHz results in windows...
( 1 2)
|
|
15 |
2,219 |
|
|
intel celeron 366 on MU440EX by
pil
I have a celeron 366 running on a intel 4M4UE0X3.86A motherboard. I heard
that the 366 performs quite good when overclocked and that it is almost
always successfull.
I have one of those card CPU's. I noticed that there is clock settings on
the card 100mhz and 133mhz.
I can't seem to overclock...
|
|
1 |
1,433 |
|
|
upgrade recommendations? by
Lee
Hello
I have decided to build a new machine based around an intel P4!! been using
amd for long time :) so intel gonna be new to me.
The motherboard i been looking at is the Asus P4S800D-E and along with a P4
2.8ghz Prescott processor, what do you ppl think of this?
I would like to do some good...
|
|
6 |
1,537 |
|
|
Quality cooler for overclocking barton by
Jason Fox
Would appreciate if someone can recommend me a quality cooler for
overclocking barton 2500+. I don't find the noise level as important
as the cooling capabilities, as long as it's within acceptable levels.
Thanks in advance.
|
|
6 |
1,120 |
|
|
p2-99 with PIII450Mhz by
Augustus
"Claude" wrote in message
...
Can any body help me in overclocking my Asus P2-99 Mother board.
I've got a PIII 450Mhz intel chip on it, I've updated my main board bios
to
the lastest version wich is version 1012
I don't...
|
|
0 |
923 |
|
|
First time Overclocking - P43.0GHz, Abit IS7-E, DDDR3200 by
Stoneskin
I have a P4 3.0GHz HT cpu at stock FSB of 200MHz on an Abit IS7-E
motherboard with Corsair Dual DDR 3200 Memory (2 x 512)
I tried simply increasing the FSB speed, not by much for starters, and
the PC will boot but for some reason it will lose the SATA drive when it
boots. Set back to Automatic...
|
|
1 |
1,486 |
|
|
Overclocking Intel D850GB by
Ziferten
Hey, I'm new to this whole thing, but sounds interesting. I'm aware of the
dangers of overheating, but my neighbour told be that he thought the cooling
was adequate enough.
My system consists of:
An Intel D850GB Motherboard
Intel 1.4Ghz Processor
Three 80mm fans (and one for power supply and...
|
|
7 |
1,273 |
|
|
P4C800 Overclocking question by
Darren M Taylor
I have a p4c800e mobo with a p4 2.6Ghz CPU
I have 2*512MB DDR 400Mhz memory chips
When i try and use the overclocking facility in the BIOS (5,10, 20% etc) the
cpu frequency increases, HOWEVER, the memory frequency drops to 333
Anyone any ideas why this should happen?
( 1 2)
|
|
11 |
1,596 |
|
|
My Highest Temps. by
Dennis E Strausser Jr
Running three copies of TMPGEnc Plus 2.58.44.152
Encoding three @ a time. If I hadn't seen it, I'm not sure I would believe
it myself.
Filters as Follows. Deinterlace (Double)
Sharpen edge : Horizontal 14
: Vertical 14
Source range, this does nothing I know.
Audio Filter 60%
Bitrate of Video 5.1...
|
March 26th 04 07:32 AM
by Noozer
|
3 |
1,180 |