Ok MB 6vxe7+ I flashed the bios hoping to get more setting about enabling cache when I rebooted it beeps at me and won't boot. Looking at the web page I think I used the wrong flash. D/led the correct bios I am running XP I made a 98 boot disk put in the correct flash using the dos...

Got a Socket A Board. When i switch in on, it beeps 8 times. what is the beeping mean. thanks chris

Hi all I was having problems with a really slow (Cable) connection so decided to reset the PC. Only when I started the PC it hung for approx 40 seconds at the CPU ID screen - the PC then proceeds to the Drives list screen. It now does this everytime I re-boot the PC (warm and cold re-boot) and...

THANKS WILL GET A ISA VID CARD

I can't access the internet. I'm trying to install XP with my new GA-8KNXP Ultra board. The Intel Pro 1000 Local Connection is providing no data for Address Type, IP Address, Subnet Mask, Default Gateway. My cablemodem, switch, and hub are doing fine with my current Pentium 3 machine, which the...

LinuxElectrons reviews GIGABYTE's integrated AGP graphics motherbard based on the ATI 9100IGP using the Linux OS. http://www.linuxelectrons.com/staticpages/index.php/20040217230209834

On intensive CPU load / graphical load a constant beeping noise is heard through the computer internal speaker. On closer inspection and running tests it appers that the -12v is only reading -9.7v and the -5v is reading -4.7v. The computer continues to operate normally with no other problems but is...

I need to start pushing DFI's tech support for another BIOS update depending on what feedback I get here. Gigabyte GA-8IPE1000Pro with Bios F8 SATA0 Boot HD Maxtor 6E040L0 (PATA with SATA-adapter) SATA1 Data-HD Maxtor 6Y080L0 (PATA with SATA-adapter) Primary Master DVD Recorder Plextor...

Hi, Still looking for some compatible memory for my 8KNXP, someone has recommended TwinMos, thinking of trying 2 x 256s. Around £60 for the pair. Anyone using these, or what would you recommend? thanks

I'm having trouble overclocking my P4 2.6C. This is what i've done... The fastest clock speed i can obtain is 2764.184MHz. I am told i should be able to get up to 3GHz np. Vcore Normal = 1.5250 Volts Vcore Temp = 39-41 Degrees Celcius I set AGP/PCI/SRC = Auto, Ratio = 1:2 , FSB = 212MHz, which set...

Hi, Running XP, I had a ATA100 drive as my system disc (c:) on IDE1. Installed a SATA disc and "Ghosted" the ATA100 disc image to the SATA drive. Set the BIOS to boot from the SATA drive and disconnected the IDE1 disc. Get to the Windows splash screen, load hangs, saying it "can't verify...

I want to purchase 1GB of Corsair ProSeries RAM, however before doing so, just wanted to check the compatibility with my mobo, GA-8KNXP Rev-1.0. I was thinking of Corsair TWINX1024-3200LLPRO. Is this a wise choice? Also, how overclockable is this RAM? Many...

Gigabyte 8IPE1000 Hangs on boot at the "press del to enter setup - F9 for express recovery, escape ...missing text" screen for about three minutes, then boots normally. Have any thoughts? What should I check?

Built a new system a couple weeks ago, GA-8IPE1000 Pro3 with a P4/2.8GHz/800FSB/HyperThreading. In GMT 2.0 in the "Processor information" it shows current speed as 2800MHz, which is good. It also says External Clock 200MHz -- Is this representative of the FSB, in which case shouldn't it be...

With the top performance setting enabled in the BIOS the FSB is set on 135MHz Is that the only thing top performance do? It is quite strange having a top performance option when you achieve the same with and slight overclock or is it more that I don't know about. What does the top performance...

What is the difference between the GA-8knxp and the GA-8knxp rev 2? TIA, Jeff

Are there any Gigabyte MB's with ieee1394B and an Intel chipset, i couldn't locate any on their site, Just wondering if this uniques to Gigabyte. Are there any MB's outthere that have ieee1394b and an Intel chipset? TIA, Jeff

Hi, Have a Gigabyte GA-5AA mobo with a AMD K6-3 processor and one 128 MB Kingston ECC memory-module. The Aladdin 5 chipset supports ECC memory. I can set "Parity Check" in "BIOS FEATURES SETUP" enabled/disabled. And I can set "DRAM Data Integrity Mode" in "CHIPSET FEATURES SETUP" to Parity or...

I just built a system yesterday: GA-7N400PRO2 Athlon 2800+ "Barton" 768 Mushkin "Basic Green" RAM 80 gig 7200 WD drive 80 gig 7200 IBM drive Sony CDRW Sony DVD ROM Chaintech GF 5200FX

I have just installed this board and now I'm thinking of upgrading my processor to one of those new Prescott ones. What I wanted to know is does this board have a limit as to how fast the processor can be? Cheers. Si