I hate posting to mutiple news groups, but I'm trying to find out what=20 PCI Express x1 is going to be used for ? I've done searches and couldn't find any info and figured that it would = be good to post this in the main motherboard newgroups at the same time in hopes of getting a answer. thanks...

Using a Giga 7NNXP board, Copper bottomed heat sink on top of a 3000XP CPU. With 1 Gig mem (Samsung). ATI 9600XT graphics. Power supply churning out 550 actual power. Two large fans blowing in from the front, Two large fans and an exhaust blowing out at the back. Latest BIOS installed. Had the...

GA-8VM800PMD-775-RH I'm trying to mix a 1gb stick, with a 512mb stick. But I only get a total of 1gb, instead of 1.5gb, as expected. Can't find anything about "all sticks must be the same size" on the Gigabyte...

Gigabyte has released the first updated BIOS for the 8KNXP v2.00 (Version "FD") This board was initially shipped with v.FB. I don't know what happened to FC! New features include: 1.. Support for Intel Prescott and P4Extreme family CPU's. 2.. Fixed CD-ROM can't boot issue.

My PC doesn't boot into Windows (98 SE) first thing in the morning without hitting the reset button. It is hanging close to the last stage in the boot sequence. It does start after the reset button has been pressed however. I have just installed a new Gigabyte GA-7VA mobo and two sticks of 256 mb...

I've been trying to configure a second system using PCI boards. Since I'll need as many slots as possible, the GA-P35-S3G was recommended. (I haven't been able to locate a similar ASUS board---does anything exist?) I'd be using the system for downloads, background processing, etc. so I'm...

I have had a computer built around this board almost two years with no real issues. Since it has gotten cold (~58=B0C at night in the house) this winter, I have had multiple incidents where the computer will not even go through the BIOS level start up. As soon as I turn on the machine, I get...

I find this board really well-priced against other NF3Ultra MBs like the MSI Neo2 Plat MB. Are they for the new 90um A64 939s? Is it bad or what? Maybe you guys can tell me if there are probs or instabilites. I have not used Gigabytes for ages... they were problematic the ones I

Excuse for my poor english... I have noticed that when i try to read from my two maxtor 60 gb in raid 0 the value sounded normal (70-80 mb/s) but when i'm trying to write in that discs the value il really really poor...like an ata 33 hd...does anyone know about this problem?? I'm using win xp pro...

OK, I did have: Gigabyte GA8-848P (L) BIOS F5, P4-2.66/533 fsb (Northwood), 1 gig PC3200 (DDR400 @166 real=333), Radeon 9800 Pro 128, WinXP Pro SP1. System ran fine, cool, no problems, no resets, no video card lockup, no crashing. Far Cry, Half Life, Q3, Morrowind, UT2004 all ran fine, I could...

I have two 512MB DDR2 400 PC2-3200 memory modules in my 8KNXP and I want to add two more. Is this the right stuff, and a good price? http://www.buyaib.com/index.asp?PageAction=VIEWPROD&ProdID=2349 The part number on my current memory is D512M400SA Another thing - I have BIOS version F5. What do I...

Last year there I noticed one or two comments about Service Pack 2 creating problems on a Gigabyte 8KNXP system. Is anyone running this combination successfully? Thanks, Jim

Good Grief !!! Does anybody know what is going on here? This is my third, yes, that's right, THIRD! GA-7N400 Pro (R2) that will not read any of my 6 Maxtor hdds !!!! Has anyone a clue as what it is I need to do to get these little bums to read ANY hdd? I've switched cables and even had one board...

Problem: I recently upgraded my CPU from a 2.6 to a 3.4 Prescott, and added a SATA HD (WD Raptor). After installing the CPU I checked my system configuration in XP and noticed that the CPU was only recognized as 2.8 GHz. I figured this to be BIOS related and proceeded to upgrade my BIOS. I was...

Hello Everyone, I just purchased an Intel D865PERLL motherboard because I had heard they made the most reliable and compatible boards on the market (but definitely not the fastest!). However, to my surprise I have found that they do not support drives over 137GB, even on the SATA-150 channels...

OK, i have no doubt this question has been asked before. I am soon gonna have an 8KNXP rev. 2 board and will be using a single WD Raptor 74GB. I also have a Plextor burner and DVD drive. So how should i set them all up?, should i use the Intel IDE 1 for the optical drives + the Raptor on...

my GA-7N400-L mobo will not work with the clk switch set to automatic. i installed the mobo using the default settings to make sure it worked. after getting win xp working and getting the mobo drivers installed i tried setting the clk switch to auto - comp will not boot. i have an athlon...

Please, can somebody help me with this ? Gigabyte GA-7VRXP + AMD XP2400 + 2 x 256 Mb DDR2700. The above runs various versions of DOS, from either floppy or hard drive (60 Gb Seagate), fine - no problem at all. If I try to install Windows 2000 it all seems to be going well until I get to the point...

I'm having trouble overclocking my P4 2.6C. This is what i've done... The fastest clock speed i can obtain is 2764.184MHz. I am told i should be able to get up to 3GHz np. Vcore Normal = 1.5250 Volts Vcore Temp = 39-41 Degrees Celcius I set AGP/PCI/SRC = Auto, Ratio = 1:2 , FSB = 212MHz, which set...

Hello, Has anyone else noticed a problem with the onboard "Intel Pro/1000 CT Desktop" ethernet controller only detecting a 10 MB network, even if you're on a 100 MB network? This problem is driving me insane. I've already tried flashing the BIOS and updating the drivers, and the problem...