The two main usb ports on the mobo work fine, but I connected the extra 4 usb ports from the 2 additional usb sockets on the mobo but they don't work at all. Any ideas? They are enabled in bios.

I recently changed the IDE RAID to SATA RAID on this computer. The SATA RAID driver causes some of my programs to carsh. Quicken 2004, Sandra 2003 will not function correctly and cause a BSOD. Anyone has any solution to this problem. Anyone tried a different driver? -me-

Hey all, I just purchased this board. It has: 2800+ barton 512 pc3200 auto clock settings, 166 fsb set on the board. First, I had a hell of a time getting the fsb, autoclock settings right, it would boot fine with the clock jumper auto setting to off, but not with it on, so I was getting it to go...

What would be the faster chip.... AMD 2500+ Barton core or 2600+ T-Bred core (166 fsb)? the t-bred has higher mhz but less l2 cache than the barton opinions?

Has anyone make the above compo to work using the onboard silicon image controller?. The bios of the onboard controller is rather old(4.1.35c) while the newest available is 4.2.15. I hope gigabyte delivers a new bios soon cause bios flashing(using silicon image utilities) works only for pci sata...

Wow ... f7 bios released ... quoting "Support intel Prescott and P4Extreme family CPU" GREAT !!! Thanks GigaByte !!! Andres Zanzani Rimini, Italy

Is there a utility to flash the bios of the onboard silicon image sata controller? Its bios is 4.1.35c and the seagate barracude 120 has data corruption problems. I installed a pci silicon image controller and had to flash its bios(it came with 4.1.34!!) to 4.2.15 in order to make it work with the...

Hello everyone, once a day, or once every couple of days, I experience computer freezing and sreen reset to minimal default. It happens very randomly, especially while I'm connected to the Internet, with eMule (v0.30c) or ShareAza (v1.8.9.34) on. At some point, out of the blue, the mouse pointer...

On Fri, 28 Nov 2003 22:36:42 -0700, William wrote: Can someone help me to connect two computers to share data? What do I need to install in each computer? Thanks

Hi there.. I hope you can help my friend. He has a Gigabyte GA-7ZXE motherboard and is suffering random reboots. Initially I thought it had something to do with heat - the longer it was left off (eg. Overnight) the longer it lasted when it rebooted. However the CPU Temp is quite stable around 50c....

OK, I read a bunch of old notes about problems setting up Raid with the 7VRXP motherboard. Here's my setup: IDE1 Master 18GB system and stuff - boot disk IDE1 Slave 40GB IDE2 Master CDRW IDE2 Slave DVDRW IDE3 Master 160GB Removable carrier (master? of a security array)

Hi, while the system (P4 3,2 - 1024 MB TwinMos) is booting, no pci cards are recognized. I´ve tried to put them in different slots but it´s always the same. Sometimes the cards were recognized - sometimes not. I´ve set the bios to defaults - get the newest bios F8 - cleaned the contacts of the...

Hi, while the system (P4 3,2 - 1024 MB TwinMos) is booting, no pci cards are recognized. I´ve tried to put them in different slots but it´s always the same. Sometimes the cards were recognized - sometimes not. I´ve set the bios to defaults - get the newest bios F8 - cleaned the contacts of the...

Hello everyone, once a day, or once every couple of days, I experience computer freezing and sreen reset to minimal default. It happens very randomly, especially while I'm connected to the Internet, with eMule (v0.30c) or ShareAza (v1.8.9.34) on. At some point, out of the blue, the mouse pointer...

Hi folks I have a 7n400 pro2 and I want to add a Game port. I see in the book that there are pins on the MB for a Game port .But Mb's used to come with the cable and connections None came in my MB box, does that mean I now have to go out and buy a special Card or a special Game port to plug into...

DavidM wrote: Hi all, I built my own computer some time ago now and at that time I selected the 8hixp board. I could not afford a lot of memory so stuck in two sticks of 128 x 16 - 4/128 non-ecc memory. I would now like to upgrade the amount of memory by adding two further sticks of...

On first boot, boot from the Windows XP CD and run a repair install. Then install the mobo drivers, etc. If you let XP boot without doing this first, things just may not work correctly at all (IE really badly) - this is highly likely. So if you wish to test the mobo with say memtest86, good, but...

Re Bios version 10, where can I access it? I recently tried to flash upgrade using the CD which came with the MB when I originally bought it 2 years or so ago. I remember finding this so much easier than a previous method. Anyway, this time this preferred method gave me a number of Internet...

Hi: A friend of mine is trying to put a 2400+ in my GA-7DXR. It previously had a 1.333 thunderbird in it. The system won't power up now. We've tried different power supplies, another cpu (900 mhz 200 FSB), clearing the CMOS, taking out the battery, and replacing the power switch. Before I took...

I purchased the GA-K8N Pro with two sticks of 400 MHz Ram and at first was unable to boot. So I disconnected everything, removed the board and tried again. I then was able to boot but when I tried to install the OS, both XP and 2K and continuously rec'd a memory dump error. I had 3 other sticks...