I've just bought a second-hand Fujitsu-Siemens Scaleo P which has a Gigabyte 8i848-PM motherboard. I can't find any reference to this board on Gigabyte's website, so I was wondering if anyone knows if it's identical to any of the following that are listed: 8i848P (rev 1.x) 8i848P (rev...

I recall someone saying that he/she is in posession of the BETA BIOS for the 8I875Ultra mobo. I was wondering if that someeone could send me those BIOS on my mail? Thanks in advance! I was also wondering what INF version to upgrade my 8I875Ultra to? INF 7.x.x or 6.x.x ?

I got a 8I915G Pro board with Marvell gigabit network card on board, I had the following questions: 1. The NIC has two MAC addresses with one single RJ-45 port, why two addresses? When we need two MAC addresses with just one port? 2. The onboard 88E8001 chip is Ethernet 10/100/1000TX supported,...

Hi Guys Im having problems overclocking pass 222 in Bios Ive Got 3.2 Skt 775 1.5Gb ram DDR2 533 250Gb SATA 7800GTX Gigabyte With evry thing clocked 3.53 (221) Ghz Graphics 489/1389

Hi just wondering if anyone has this motherboard 8I945P-G. I just updated the bios using the @bios utill on the mobo driver disk. It tells me that all went well and that I need to reboot my machine for it to take effect! That’s where it all went pear shaped. When I restarted there's no vga nothing...

Hi, I just read the manual for this motherboard: gigabyte 8i955x Since I am interested in buying a new computer I am interested in your experience with this motherboard in case you have bought/own/use/used one ;) I am also interested in any other motherboard/chipset which would be best for...

Hello guyz^glrz i have p4 gigabyte motherboard with 1.7 GHZ intel. last day i was working on office 2003 word i had a system hangup and i had to restart as no key except RESET :( was working and i also had same problem when i was running jetaudio 4.9v and i restarted but when i shut down normal...

Hi, I've had 3 systems using a Gigabyte 8IE--533 returned to me this week which seem to have a faulty IDE Secondary controller...When the machines arrived they would not boot at all,but when diconnecting the CD Rom off the secondary controller they appeared to boot up fine....Have tried new CD...

Hi all, Hoping someone can help me. I have a gigabyte 8IEXP mobo that previously had a 1.8ghz Intel P4 Northwood CPU. I've upgraded the CPU to a 2.8Ghz Northwood but everytime it does a cold boot (eg first boot of the day) the Award Bios always goes: Check System Health! Vcore = 1.525V Now my...

I built a computer with an 8IHXP main board. I have an Antec SLK3700AMB case with two USB connectors on the front of the case. I followed the connectors exactly to connect from F_USB1 to those connectors. When I plug in a USB device it gets recognized but does not connect properly. I am using...

Can my Gigabyte GA-8IHXP use a AGP 8x video card? The motherboard has a 4x 1.5v AGP slot, and I'd like to put one of the new ATI x800 XT cards into this computer. I'm pretty sure I can, with the board running at 4x only, but I want to make sure. Thanks

Hi, just wanted to know whether the latest Intel P4 800FSB Hyper Threading CPU, could it be used on a Gigabyte 8IHXP motherboard running RamBus Ram. Any advice is much appreciated and many thanks in advance. Anthony

Answering my own question and posting FWIW under a more relevant subject. It turns out my trouble getting my 8IHXP out of STR was in fact related to the f8 bios. When I reverted back to f7, STR now works perfectly. This is one of those cases where I should have just left the bios alone as I am...

I am making some tests with memory and CPU overclocking, so sometimes timings are too short for my memory and it doesn't boot again. I have no clear Cmos jumper, only clear pwd jp. So I have to remove battery, up to now it's OK the mobo is on a table, but when it wil be in the box.. Is there any...

Hello, I've put together many systems, but this is my first experience with a Gigabyte board (GA-8IK1100 Rev. 2.0) . I have a 120 GB Seagate SATA drive that I want to boot from, and two IDE ATA 100 drives that I'd like to use as 2nd and 3rd drives. Can someone please tell me what bios version,...

Based on all of the glowing reviews I was a day away from ordering Abit's IC7 when I stumbled on their forum and found they had a serious issue with their onboard sound. So now I'm looking again. These two Gigabyte boards also seem to be very well rated. I have some questions: - Are there any...

Just built up a new system and can't get any AGP graphics boards to work. During post I get 1 long and 2 short beeps, and no picture. When I insert a PCI video board everything is fine. The two AGP boards I tried were Matrox Marvel G450 eTV and Asus V7700 Pro Deluxe. Any Ideas?

Why with my 8IK1100 I cannot set the memory frequency multiplier to 1.6x 2.0x 2.5x 2.66x ?? It is blocked, I can set it only at 2,66x.

Hi, I've just bought a 8ik1100 board and just install a floppy, no Hdd, no OS. I have the FA bios and I try to upgrade the Bios to the F8 version but I always have the same error, by the floppy with flash872 or by the Q-flash utility on bios setup Something like "Bios ID error" What's the problem?

Is the manual correct in stating this board only does SATA RAID 0 and only on WinXP? TIA, Eric