Hi, I have a Gigabyte GA-6BXD motherboard, revision 1.6 and was wondering whether it supports Coppermine CPUs. Gigabyte seem to have removed the CPU support information from their website for this board... Cheers, Campbell

Is this board still available? I only saw one store in Froogle.com and it's OOS there. -- - Zilla Cary, NC USA (Remove XSPAM)

Generic m/b question. Supposedly this board is capable of 333 MHz FSB. How do I set my switches to achieve this? - SW1: 100Mhz or 133 MHz - currently set to 133 MHz - CK_Ratio switch: set to Auto I'm trying to verify is it's my settings or if someone sold me the wrong CPU. It's suppose to be an...

Old I know but works for the most part... I keep losing USB connections on this board. For example all of a sudden my USB keyboard or mouse loses connection (no response from mouse of keystrokes). I have to unplug/plug them. I've updated the latest drivers, and Win2k/SP4 updates. I have a 400W...

Also posting the GA NG. -- - Zilla Cary, NC (Remove XSPAM) "Zilla" wrote in message ...

Old board I know, but it (still) works! I'm trying to make an 2-port all-USB KVM swith work with my PC, running Win2k/SP4, and a laptop running WinXP. The laptop "sees" my keyboard and mouse, but my PC does NOT. I know I'm getting signals from my keyboard/ mouse to the KVM since I can enter the...

Help with a fundamental setup for GA-7VRXP v1.1 board. Board supports 266 MHz FSB and DDR-333, and I have an AMD Athlon 1800 XP and Crucial DDR333 512MB. I have the system clock set to 135MHz right now; any higher setting crashes the PC. Seems like I can o'clock higher that 135MHz, can't I? -- -...

Hello all, hoping for some help. I just upgraded my 848 based Intel board to the Gigabye 8IK1100, Rev 2.0. My hardware is as follows: 8IK1100 Rev 2, Bios FG (latest) 4x512mb Infineon Cas 2.5 DDR 400 (dual) 120gb Seagate IDE (Baracuda V) 400W Fortron/Source Power supply P4 2.8 Northwood (800 bus)

I have a GA-P35-DS3R motherboard and I just bought a new Samsung SH-S203N Sata DVD burner. I finally was able to get the Sata Burner to work in Windows XP by disabling the SATA RAID/AHCI mode which makes the sata drives act like IDE drives. Before that I could read okay, but received errors...

I have been trying to boot a 256M flash drive that I have and I am having trouble. So, I am wondering if it is my flash drive itself or something to do with my motherboard. I followed the examples I found on the web in how to load linux on a USB drive and make it bootable. I used HP's USB...

I have a GA-P35-DS3R motherboard and I have a Seagate ST3250410 250G hard drive installed. This works fine and shows up in my safe to remove hardware just fine. I just bought a similar hard drive, a ST3320620AS 320G hard drive and installed an external e-SATA enclosure. Both drives support...

Any one know if there is a version of Linux that works with this motherboard and a core 2 processor? I have tried several versions, but they all hang during the installation. Z.K.

I just recently bought a Gigabyte P35-DS3R with a 2.0G dual core processor. It has been working great, but I was installing linux as a dual boot the other day and I put in an extra IDE drive on a PCI controller and now it won't even boot. It stops at the memory test and even the keyboard will...

I have a GA-P35-DS3R motherboard and device manager is listing two unknown PCI devices. I have used all my driver disks, but it can't find a driver. The only PCI device that I installed was a IDE hard drive controller, but that driver was already installed and the hard drive is functioning. ...

Anyone know why a floppy drive would not work on a GA-P35-DS3R motherboard. I have tried two different floppy drives and two cables, but they just sit there and spin and won't boot or read anything. Z.K.

I just bought a GA-P35-DS3R motherboard with a 2G dualcore2 processor and 1G of memory. Everything was going fine until I installed the hard drive. My CD-ROM reader boots okay, but when I install an IDE hard drive on the IDE cable, my system hangs. This happened with 3 different IDE hard...

I just bought a pair of Corsair TWIN2X4096-6400C4DHXG, but when I install them my motherboard will not boot. I installed it correctly in slots 1 and 3 per the manual and took ESD precautions. I made sure they were seated properly, but it comes on and then shuts off, then comes on again until...

nope, you're about 100W short of stability in my opinion. "markOpolis" wrote in message ... Hello everyone, In my neverending quest for stability, I'm wondering if my Antec SmartPower 300W delivers enough power for my...

kinda sick that obsolenscence is only 6 months away? Prescott and Athlon64 by the fall and we're all shopping again? This is nuts "LiveWire" wrote in message news:Qh_Ra.94783$H17.28638@sccrnsc02... Is there anything planned to be released over the next couple of months? ...

I forgot to reply about CFS3...I run it at 1024x768@16-bit as my video card is only a Radeon 8500 and I don't want to slow it down...I need to keep my Thunderbolt moving fast to get away from the FW-190's! Cheers Mark "Rob" wrote in...