|
|
BD7-II Raid Help needed by
BigAl
Hi All
Any suggestions on the following little problem. Providing I don't power
off the system everything is OK. If I power off the system I lose the 2
hard drives connected to the RAID IDE3 and 4 slots. I'm not using them for
RAID, simply as additional drive space.
If I simply restart the...
|
July 21st 03 01:54 AM
by TomG
|
6 |
754 |
|
|
PC doesnt boot first time and doesnt shutdown by
dann
Hi,
ABIT Fatality an8 sli mobo, 1GB DDR, 430 WATT Antec PSU
All of a sudden a week ago I come to switch the PC on from the power button
on the Case and nothing. I can see the mobo illuminated red from its onboard
mobo lighting so there is power to the PC. I have to keep pressing the
button...
|
August 21st 06 08:31 AM
by tssk
|
6 |
1,083 |
|
|
COMPTER FREEZES/CRASHES in minutes IF TOO MUCH USE by
John
USING: ABIT BH6 motherboard with 1.3GHz Intel Tualatin processor using
an adaptor. WD 250GB & WD 200GB harddrives connected to motherboard
with Promise Ultra 100 IDE controller card that came with the WD 200GB
Hardrive. Video Card - Ati AIW 128 PCI 16MB.
BEFO Windows 98(not SE) was loaded onto...
|
|
6 |
1,227 |
|
|
nf7 s2 die after cleaning by
Bernie
Hi there, my first post.
i have nf7 v2 board on my system everything works great till i decide
to clean it. took it all apart and put it together then wont get
anything. power on board fan spinning but no beef or post.
I have 2500 barton on it with 1 gig ram. all components are working
bec. after...
|
December 25th 05 07:29 PM
by Bernie
|
6 |
1,072 |
|
|
KT-7 and Capacitor Problem by
Tom Snoiker
Been using this KT-7 for some time and just the other day started
acting badly. Registry corruption on shutdown, booting issues, random
crashes in windows. Also noticing my CPU has been running hot (42C in
a 30C system environment, they claim this is a symptom of capacitor
issues)
I've checked...
|
November 11th 05 05:50 PM
by ROEKing
|
6 |
1,194 |
|
|
Recover from motherboard failure - Data on RAID0 array! by
FlyByKnight
I have an ABIT VP6 with on-board HPT RAID controller. I have 2 30 GB drives
in a RAID0 array.
My MB failed (won't boot at all). Does anyone know the process for
recovering data? I have a HPT PCI card that I used before I purchased the
VP6. Can you configure a RAID controller of the same brand to...
|
|
6 |
684 |
|
|
ABIT ***FlashMenu v1.36*** by
Max
Updating the BIOS on an ABIT motherboard just got even easier! With
ABIT-Engineered FlashMenu, users no longer have to update their BIOS through
booting up a floppy disk. BIOS updates can be done automatically through
Windows!
Download the latest version...
|
|
6 |
524 |
|
|
Code 0.4 on KV8-MAX3 Board by
dave
Hi -
This is my first posting to a newsgroup, be gentle.
I recently fried my system, and rebuilt. I purchased an ABIT KV8-MAX3
motherboard, and built the system around it (all new VideoCard, RAM, 10k
harddrive, etc).
After spending the weekend putting it together, the thing won't boot. I turn
it...
|
July 27th 04 05:42 AM
by AP
|
6 |
376 |
|
|
|
|
6 |
527 |
|
|
ABIT BE6/ XP fails but 98 installs by
Karthik
Wondering if you resolved this. I am having the same problem with my
ABIT BE6 board. XP worked fine for months and suddenly started hanging
and now it wont either install or be stable (depending on which CPU i
use). Win 98 is stable tho.
Tried replacing every component including RA, video card,...
|
December 4th 03 09:36 PM
by Karthik
|
6 |
648 |
|
|
abit VI7 mb + DDR 400 = BAD MEMORY !!??? WORSE after bios update!!!!! by
Bob
I've got a vi7, and 2 sticks of Corsair 256M ddr400 mem.
the mb came w/ ver. 15 of the bios.
I was able to install xp pro with little trouble, but after a couple
of strange BSOD's; I decided to run a memory test. I used memtest86
(v3), and discovered that test #5 had some failures - and ONLY...
|
January 17th 04 01:09 PM
by Bob
|
6 |
566 |
|
|
nf7-s memory question by
Scott
I am thinking about buying the nf7-s 2.0 board and I have a couple of
questions...
I have two sticks of more or less generic pc2100 256mb ram, and I
would like to add another one stick of 512mb. Do I have to use pc2100
or can I buy pc2700 or pc3200? Any other advice? Thanks!
|
February 20th 04 10:12 PM
by Apollo
|
6 |
398 |
|
|
New Build Hangs by
matt
Hi
Thanks for the reply. I am looking into your suggestion, and I think you
maybe right. However, how come it only freezes/hangs when dealing with IE or
OE or dial up issues?? I would have thought video card snags would be
apparent at any time!
Any suggestions as to the right video card?? I do...
|
February 22nd 04 10:07 AM
by matt
|
6 |
500 |
|
|
Seeking advise... by
ZR
Have had an NF-7 900 Mhz and have been satisfied.
Am looking to assembe a new computer (no gaming but much heavy images
to manipulate).
What is the suggestion for a new and good (better) MB and Processor ?
Thanks for any advise.
|
September 4th 06 01:58 AM
by ZR
|
6 |
991 |
|
|
TH7IIRaid - Upgraded CPU To 3.06Ghz but Not stable. by
127.0.0.1
X-No-Archive: yes
I just recently upgraded my CPU on my ABUT TH7II RAID board to a 3.06 GHz
Northwood with a 533 FSB.
The problem is that when I boot into Windows 98SE it freezes and locks up.
DOS is fine.
What should my settings be ?
|
April 19th 04 09:50 PM
by yuma
|
6 |
676 |
|
|
KT7A-RAID and 1.333 Tbird by
NuT CrAcKeR
Hey groups,
I gave a board to a friend that was running with an XP2100. It worked fine
for me, but he re-installed XP and has had problems with it.
I know the guy is a good tech and system builder (I have known him for
years), and while the machine was good for me when I ran it , he uses...
|
|
6 |
362 |
|
|
KV8 Pro v1.1 Sempron 2800 - boot up problem by
Marcin Cie?lik
Hi
I've problem booting up my freshly assambled system
CPU: AMD Sempron 2800 (have 2 pcs none works - can't check them)
MEM: Hynix 512 4ns (have 4 pieces of it neither one works - all work
well in other PC's)
Gigabyte Radeon 9550 128Mb AGP 8x (works well in other PC's i've also
checked a AGP 4x...
|
|
5 |
689 |
|
|
KR7A-RAID locking up, sound problems by
Martin
Hi. I wonder if anyone here has the solution to the problems I am
experiencing with this motherboard?
When playing mp3 files, avi files or games, the system locks up after a
period between 20 and 60 minutes.
Sometimes it completely locks up and I have to cut the power.
Sometimes it reboots itself...
|
December 28th 04 12:04 AM
by Martin
|
5 |
1,041 |
|
|
What am I doing wrong? by
Doonie
I have an old Abit IT5H rev. 1.5 equipped with a Pentium 200 MMX
running Windows 2000 Professional. The four SIMM slots are filled
with 128 (32 x 4) Megs of EDO, leaving the two DIMM slots available.
The manual says those DIMM slots require 3.3-Volt, unbuffered EDO.
Twice now I've tracked down an...
|
August 29th 04 05:59 AM
by Doonie
|
5 |
509 |
|
|
Please, I need help with my NF7-S2G mobo... by
Joe
Hi,
I bought the NF7-S2G motherbard a couple of months ago, but I never was able
to make it work properly.
First of all the BISO does not recognize the processor. I installed an AMD
Sempron 2600+/1.8GHz, but the BIOS show AMD Athlon at 1100 MHz. Why ?? And
what do I do about it ?
Also I have...
|
April 24th 05 08:41 AM
by Arne
|
5 |
521 |