|
|
ic7-g sata raid/onboard network problem. by
FireFox
My boot drive (60gb ata100) failed, so I replaced it with 2 80gb sata
drives (raid 1, on the ich5-r controller). The onboard intel gigabit
ethernet controller would not work at all (maybe an interrupt conflict??)(it
was working 100% before my hd replacement). I was forced to install my...
|
February 2nd 06 08:55 AM
by FireFox
|
0 |
813 |
|
|
AG8 and intel 630 CPU by
Sasqui
AG8, 3.0 GHz i630 Chip, 1GB Geil DDR500 Ram. Running happily at 3.7 GHz
(247 fsb), Sotck Voltage on everything, BIOS Rev 24 - I've encountered some
quirkyness with this board, works the same in the BIOS screen, or uGuru:
1) To overclock, I have to bump my FSB at 5-10 mhz increments at a time....
|
February 1st 06 05:41 PM
by Sasqui
|
0 |
811 |
|
|
uGuru2005 betatesters need! by
hmonitor
Recently, I've added support for newest Abit monitoring chip uGuru2005
into my monitoring utility - Hmonitor, and looking for betatesters.
The chip is used on these mainboards at least: AL8, AW8, NI8.
If you're interested and want to help, please, write to
Active...
|
|
0 |
818 |
|
|
KV-80: cpu fan shows correct RPMs, other two fans show zero. Ideas? by
David Ruggiero
Have an ABIT KV-80. Flashed to latest (-17) bios. Three fans are
plugged into the fan headers:
AMD's included CPU fan to "CPUFAN" header
Thermaltake chipset fan to "NBFAN" header
Enermax PS fan lead to "SYSFAN" header.
Only the CPUfan shows RPMs when I go into the BIOS's "PC Health"
screen. The...
|
|
1 |
968 |
|
|
IC7 RAID? by
Tom S
I'm trying to build a new IC7 system with a SATA RAID as the boot drive (Win
XP), but the user manual isn't clear on how to do this. The default
settings seem to want to install on only one drive (of the two). Any help
out there? TIA..
Tom S
|
|
1 |
1,038 |
|
|
|
January 28th 06 05:37 PM
by tinman4
|
0 |
1,033 |
|
|
XP Pro SP2 setup failing with Abit AW8-MAX by
Joseph Mouhanna
I am trying to install XP Pro SP2 (32 bit version) on a new system. I go
through the setup and everything looks normal, hit F6 to load the Intel RAID
driver, it loads it and continues loading what it needs to get started, then
it says Starting Windows, and it blue screens with the...
|
|
3 |
938 |
|
|
Abit GD8 motherboard - opinions? by
Paul Speller
I'm looking to buy a motherboard with four DDR (not DDR2) RAM slots,
which supports PCI Express x16, has at least one normal PCI slot and
several normal PCI or PCIe x1 slots for future expansion, has at least
two standard IDE channels (to take at least four non-serial ATA
devices) and supports my...
|
|
1 |
999 |
|
|
KD7 won't post at 166 FSB by
Jeff
I'm trying to get my Abit KD7 board to run at 166 FSB, but it will only
POST intermittently, maybe every third attempt. Once it does POST, it
will boot to Windows XP and be completely stable. I'm using a new
Barton XP 2800, not overclocking. I've even tried underclocking and
using my old TBred...
|
|
3 |
1,033 |
|
|
bh6 and 1.1ghz pentium 3 by
[email protected]
I got a bh6 mainboard with SS bios. I also got an upgradeware slot-t
adapter. I was given a pentium 3 1100mhz, 100mhz fsb, cpu. I can't
get this to work. When I boot up I simply get a blank screen. Has
anyone else got this to work? If so do you have any clues what I'm
doing wrong? Jumpers...
|
|
1 |
1,009 |
|
|
NF7-S Northbridge fan by
Vertigo
hello,
my northbridge fan hasnt worked since i bought the board, yet the
system runs nice and stable. but summer is here, and heat is becoming a
worry, so i attempted to see what was wrong with it.
turns out, the heatsink is too tightly screwed on, preventing the fan
from moving. ive tried and...
|
January 14th 06 06:36 PM
by Mike
|
2 |
1,161 |
|
|
AW8-MAX stuck at verifying DMI Pool Data by
Joseph Mouhanna
System details:
ABIT AW8-MAX
1 GB DDR2 667MHx RAM (2x512)
Intel Pentium 4 660 (3.6 GHz) CPU
2 x 250 GB SATA II hard drives (connected to SATA1 and SATA2)
SATA DVD Burner connected to SATA5 (Plextor)
8-in-1 drive (floppy + card readers) connectecd through the internal USB
connector + Floppy...
|
|
0 |
1,249 |
|
|
Cannot install over 3GB on AW8 Max (meant to support 8GB!) by
Peter Hucker
I have four 1GB memory modules (GEIL PC5300 667MHZ latency 3,4,4,8) and an Abit AW8 Max motherboard, with a Pentium D 2.8GHz CPU.
I can install any 3 of these memory modules into any 3 of the slots, and it works fine.
If I install all 4 at once, I get POST code 4E on the motherboard's POST code...
|
|
7 |
2,320 |
|
|
AN8 Ultra, Interrupt problems, ACPI manipulation by
Jürgen Brulow
Hello, I have build a HTPC, or media PC with the following components
assembled:
CPU AMD Athlon 64 3200 +
Mainboard ABIT AN8 Ultra
Graphics Sapphire Radeon X300SE PCIe
TV analogously TV station KNC ONE DVR
TV DVB-t TV station KNC ONE DVB-t
Hard...
|
|
2 |
1,034 |
|
|
Accessing bios by
Rossco7
Hey all,
Just bought new nf7-s v2
installed 120gig wd sata drive and 80 gig ide
i push de; to access bios and sometimes it lets me in sometimes it doesnt.
When it doesnt it goes to a blank black screen with a thin blue line at the
bottom and a flashing cursor at the top.
i have the latest bios...
|
December 27th 05 04:57 PM
by sdlomi2
|
1 |
927 |
|
|
Matrox G550 will work with 785 Chipset? by
anao
Hi,
My Asus motherboard (P4P800 Deluxe) is dead & I would like to buy an ABIT
motherboard with the 478 ( I have a cpu P4 2.4 & 4X256 DDR400 PC3200) & 875
chipset or 865 but all these boards have AGP 8X & the Matrox g550 is the
AGP is 2X/4X, is my card could work with this chipset?
Thank you.
Jean
|
|
1 |
989 |
|
|
nf7 s2 die after cleaning by
Bernie
Hi there, my first post.
i have nf7 v2 board on my system everything works great till i decide
to clean it. took it all apart and put it together then wont get
anything. power on board fan spinning but no beef or post.
I have 2500 barton on it with 1 gig ram. all components are working
bec. after...
|
December 25th 05 07:29 PM
by Bernie
|
6 |
1,062 |
|
|
CPU Temperature on IC7-Max by
Patrick Mc
Trying to make an accurate adjustment to Motherboard monitor for my new
motherboard. This motherboard is known to read its cpu temps high, how high
is it though to be reading?
Thanks in advance
Patrick
|
|
1 |
768 |
|
|
nf8 and sound by
Peter
What sound drivers would be the best the realtek from their website or the
nvidia sound drivers which seems to be from april? Anyone know? Thanks
|
December 19th 05 02:45 PM
by Peter
|
0 |
700 |
|
|
|
|
0 |
868 |